Materials Science & Technology: المرسلات الحديثة
السجلات المعروضة 21 -- 40 من 341
-
Effect of layered transition metal dichalcogenide hybrid nanomaterials on the piezoelectric performance of non-solvent induced phase separated polyvinylidene fluoride
( John Wiley and Sons Inc , 2024 , Article)Layered transition metal dichalcogenides (TMDs) with high aspect ratios enhance the alignment of polymer chains and induce a preferred orientation of the polymeric crystallites when incorporated into polyvinylidene fluoride ... -
A Facile Approach to Develop Polyvinyl Alcohol-Based Bio-Triboelectric Nanogenerator Containing Graphene- Doped Zinc Oxide Quantum Dots
( John Wiley and Sons Inc , 2024 , Article)This article presents an environmentally friendly, low-cost polymer nanocomposite, polyvinyl alcohol/sodium alginate-graphene-zinc oxide (PVA-SA/G-ZnO) based triboelectric nanogenerator by spin coating. ZnO quantum dots ... -
Thermal energy storage materials designed from recycled Tetra Pak waste and paraffin waxes with enhanced photothermal conversion efficiencies
( Elsevier , 2025 , Article)The phase change material (PCM)-integrated solar water heaters have great potential to save energy by utilizing renewable resources and to extend working hours even after sunsets. The PCM composites fabricated with recycled ... -
Recent advances in nanocellulose-based two-dimensional nanostructured membranes for sustainable water purification: A review
( Elsevier , 2024 , Article Review)Nanocellulose (NC), a one-dimensional nanomaterial, is considered a sustainable material for water and wastewater purification because of its promising hydrophilic surface and mechanical characteristics. In this regard, ... -
LiMn2O4 – MXene nanocomposite cathode for high-performance lithium-ion batteries
( Elsevier , 2024 , Article)Lithium-ion batteries still face many significant challenges for practical applications, including low discharge capacity, cyclic efficiency, initial coulombic efficiency, areal performance, volumetric capacity, and high ... -
Integrated seawater hub: A nexus of sustainable water, energy, and resource generation
( Elsevier , 2024 , Article)This review paper explores the potential for seawater desalination plants to operate as integrated hubs for addressing the increasing demand for water, energy, mineral resources, and foods, particularly in resource-scarce ... -
Cellulose-inspired approaches to sustainable EMI shielding materials: A comprehensive review
( Elsevier , 2024 , Article Review)Electromagnetic induction (EMI) shielding has become essential across various industries to counteract the detrimental impact of EMI on electronic devices and delicate machinery. Traditional EMI shielding materials, ... -
Efficient lithium recovery from simulated brine using a hybrid system: Direct contact membrane distillation (DCMD) and electrically switched ion exchange (ESIX)
( Elsevier , 2024 , Article)Seawater reverse osmosis (SWRO) brine is a readily available resource hub in many countries, fulfilling the country's freshwater need by SWRO, yet lower in a concentration of high-demand elements like Li. This study outlines ... -
Improvement in inhibition performance of anti-corrosion coatings using polyolefin matrix embedded with modified TiO2 nanoparticles
( Elsevier , 2024 , Article)Corrosion remains a critical issue for steel structures, leading to costly repairs and potential failures in industrial sectors. This study presents the development and characterization of polyolefin coatings for enhanced ... -
Enhanced lithium separation from brines using nanofiltration (NF) technology: A review
( Elsevier , 2024 , Article)This study investigates the dynamics of the lithium (Li) market, focusing particularly on the use of nanofiltration (NF) membranes for Li extraction from various brines. It covers a range of aqueous resources, including ... -
A fouling-resistant mixed-matrix nanofiltration membrane based on covalently cross-linked Ti3C2TX (MXene)/cellulose acetate
( Elsevier , 2020 , Article)A new fouling-resistant mixed-matrix nanofiltration membrane based on a covalently cross-linked Ti3C2TX (MXene)/cellulose acetate (MXene@CA) composite was fabricated by phase inversion followed by formaldehyde cross-linking. ... -
Thermoelectric behavior of Bi2Te2.55Se0.45 with a tunable seebeck coefficient: A comparison between coarse needle-like structure and bulk nanostructured alloys
( Elsevier , 2023 , Article)In this study, we compare the thermoelectric properties of coarse-grained n-type Bi2Te2.55Se0.45 alloy prepared by induction melting with the bulk-nanostructured prepared by ball milling and hot-pressing techniques. The ... -
Investigating the thermal stability of nanocrystalline aluminum-lithium alloy by combining different mechanisms: Reinforcing with graphene and alloying with Sr
( Elsevier , 2022 , Article)Interest in nanocrystalline (nc) aluminum-lithium (Al-Li) alloys is motivated by the demand for lightweight and high-performance materials for light-weighting applications and superior fuel consumption. Nonetheless, nc ... -
Structural evolution of Cu(1-X)YX alloys prepared by mechanical alloying: Their thermal stability and mechanical properties
( Elsevier , 2015 , Article)In the present study, an attempt has been made to synthesize copper based disordered solid solutions by mechanical alloying (MA) of non-equilibrium compositions. The blended compositions of Cu–1% Y, Cu–3% Y, Cu–5% Y and ... -
Artifact-free bulk nanocrystalline Al-Li alloys with multiple deformation mechanisms and improved tensile properties
( Elsevier , 2020 , Article)An artifact-free bulk nanocrystalline (NC) aluminum (Al)-2% lithium (Li) alloy was synthesized in this study using in-situ consolidation via a combination of cryogenic and room temperature milling. The mechanical behavior ... -
Microstructural effect on the corrosion behavior of n- and p-type bismuth tellurides fabricated by induction melting
( Elsevier , 2023 , Article)Numerous efforts have been made to understand and enhance the thermoelectric properties of bismuth telluride alloys. However, limited studies have been reported to investigate the corrosion behavior of these alloys and ... -
The activation of deformation mechanisms for improved tensile properties in nanocrystalline aluminum
( Elsevier , 2020 , Article)We report tensile properties and TEM observations of in situ consolidated bulk nanocrystalline Al with an average grain size of 29 nm. The nanocrystalline Al is synthesized using a combination of cryogenic and room temperature ... -
Graphene-Reinforced Bulk Metal Matrix Composites: Synthesis, Microstructure, and Properties
( Walter de Gruyter GmbH , 2020 , Article Review)This paper provides a critical review on the current status of graphene-reinforced metal matrix composites (GRMMCs) in an effort to guide future work on this topic. Metal matrix composites are preferred over other types ... -
Enhancement of Thermoelectric Properties of Layered Chalcogenide Materials
( Walter de Gruyter GmbH , 2020 , Article Review)Thermoelectric materials have long been proven to be effective in converting heat energy into electricity and vice versa. Since semiconductors have been used in the thermoelectric field, much work has been done to improve ... -
Optimization of the Consolidation Parameters for Enhanced Thermoelectric Properties of Gr-Bi2Te2.55Se0.45 Nanocomposites
( Multidisciplinary Digital Publishing Institute (MDPI) , 2024 , Article)Hot pressing represents a promising consolidation technique for ball-milled bismuth telluride alloys, yet deep investigations are needed to understand its effect on the thermoelectric properties. This paper studies the ...
