Center for Advanced Materials Research: المرسلات الحديثة
السجلات المعروضة 61 -- 80 من 1378
-
Modeling of osmotically-driven membrane processes: An overview
( Elsevier , 2023 , Article)In the modern era, mathematical modeling is a promising tool to evaluate the forward osmosis (FO) and pressure retarded osmosis (PRO) systems process feasibility and check the outcome of performance parameters on the overall ... -
Qatar desalination research: An overview
( Elsevier , 2023 , Article)As freshwater scarcity has intensified in Qatar, seawater desalination has been established as a strategic and prominent industry. This study thoroughly analyzes the current status of seawater desalination research and ... -
Improvement of capacitive humidity sensors using tris(8-hydroxyquinoline) gallium (Gaq3) nanofibers as a dielectric layer
( Springer , 2020 , Article)In this research work, we improved the sensing response of the organic-based co-planar humidity sensors using tris(8-hydroxyquinoline) gallium (Gaq3) nanofibers as a dielectric material. The humidity sensor was fabricated ... -
A review of advances in the preparation and application of polyaniline based thermoset blends and composites
( Springer , 2020 , Article Review)For several decades, forming blend and composite of polyaniline (PANI) with insulating polymers has been a widely studied research area because of the potential applications of such blends, which have a unique combination ... -
A Meta-Analysis to Gauge the Effectiveness of STEM Informal Project-Based Learning: Investigating the Potential Moderator Variables
( Springer Science and Business Media B.V. , 2023 , Article Review)In recent decades, informal project-based learning (PjBL) for science, technology, engineering, and mathematics (STEM) education has gained immense significance. Though some meta-analytical studies have reported the ... -
Advances in blends preparation based on electrically conducting polymer
( Springer Nature , 2019 , Article)This work presents an extensively detailed study on preparation and performance of four different hydrochloric acid-doped polyaniline (PANI) blends. The blends are obtained by changing four different polymers, viz. polyvinyl ... -
Pottery from Halat Aobeer and Hazem Al-Jasrah, Qatar
( Elsevier , 2013 , Article)In this paper the results of investigations on six archaeological ceramic sherds of the most common Islamic earthenware from the site of Halat Aobeer and Hazam Al-Jasrah are presented. The data was obtained by using a ... -
Recycling of polymer-polymer composites
( Elsevier , 2017 , Book chapter)Polymers are inexpensive, lightweight, and durable materials derived from the petroleum industry that are easily molded into a variety of commodities that are used in a wide range of applications. Consequently, polymer ... -
n-InAs based photo-thermo-electrochemical cells for conversion of solar to electrical energy
( Elsevier , 2016 , Article)This paper presents the photo-thermo-electrochemical (PEC) response of various combinations of the n-type indium arsenide (n-InAs) photo-electrode with different counter electrodes, i.e., Ag, Al, Cu, Pb, Zn and ITO. The ... -
Influence of polyolefin modified by Y2O3 as protective coatings against carbon steel corrosion into 3.5% NaCl media
( Springer , 2023 , Article)In this research work, we have studied the impact of Yttrium nanoparticles loaded with corrosion inhibitors dodecylamine (DOC) incorporated in polyolefin for the corrosion protection of steel. The surface analysis of pure ... -
Pit initiation mechanism of modified martensitic 13Cr stainless steel exposed to CO2 saturated acidic environments at elevated temperatures induced by Ti(C,N) inclusions
( Elsevier , 2024 , Article)The influence of temperature (25, 75, and 150 °C) on the passivation behavior of Modified Martensitic 13Cr Stainless Steel (M13Cr) in CO2 saturated acidic salt brine environments was investigated. The material was found ... -
Mechanical and corrosion characteristics of TiC reinforced Ni-P based nanocomposite coatings
( Elsevier , 2023 , Article)The requirement for effective corrosion protection and better mechanical properties in various industries employing metal components has led to the growth of nickel (Ni)-based metallic coatings. The electroless-synthesized ... -
Photo-reduced route of polyaniline nanofiber synthesis with embedded silver nanoparticles
( Elsevier , 2019 , Article)This work presents a method on the preparation and performance of four silver (Ag) concentrations in polyaniline (PANI) and polyvinyl alcohol (PVA) nanocomposite blend (PNPAg). The synthesis of Ag nanoparticles is first ... -
Capacitive type humidity sensor based on PANI decorated Cu-ZnS porous microspheres
( Elsevier , 2020 , Article)Porous microstructure materials are considered good candidates for the development of highly sensitive and fast humidity sensors. In this regard, we prepared polyaniline (PANI) decorated Cu-ZnS porous microsphere structures ... -
Nanotechnology in decontamination
( Elsevier , 2018 , Book chapter)Currently, accessibility of clean water is one of the biggest challenges faced by international society. The emerging field of nanotechnology and its applications has great potential for providing sustainable solutions to ... -
A comparative study on carbon neutral hydrogen carrier production: Formic acid from CO2 vs. ammonia
( Elsevier Ltd , 2024 , Article Review)Hydrogen (H2) is increasingly recognized as a key player in the journey towards carbon neutrality, with ammonia (NH3) and formic acid (FA) emerging as significant hydrogen vectors. This review highlights advancements in ... -
Ventilator-associated pneumonia diagnosis: electrochemical sensors for rapid and sensitive detection of pyocyanin
( Springer Nature , 2024 , Article)Ventilator-associated pneumonia (VAP) is a severe condition in critically ill patients that requires timely diagnosis to improve patient outcomes. In this study, we developed an electrochemical sensor for pyocyanin detection ... -
Encapsulation of tung oil for self-healing coatings in corrosion applications
( American Scientific Publishers , 2015 , Article)Encapsulation of tung oil for use in self-healing applications using urea-formaldehyde as the shell was performed via in-situ polymerization. Microcapsules ranging from 100 to 250 μm with a shell wall thickness of 1.7–2.6 ... -
Assessing underdeposit corrosion inhibitor performance for carbon steel in CO2/Sulfide environment
( Elsevier , 2024 , Article)Under deposit corrosion (UDC) that occurs due to the deposition of solid particles, like iron sulfide or organic solids, and CO2 corrosion, cause disasters for pipelines and fluid-handling apparatus. This research investigated ... -
Towards commercialization of self-healing technology in epoxy coatings
( National Assoc. of Corrosion Engineers International , 2015 , Conference)This work is focused on developing viable self-healing coatings especially considering the viability of the coating in a commercial context. With this in mind, finding low cost healing agents, with satisfactory healing and ...
