تصفح حسب الموضوع "Electrospinning"
السجلات المعروضة 1 -- 20 من 44
-
Activated carbon-doped polystyrene fibers for direct contact membrane desalination
( Springer Nature , 2020 , Article)Membranes for direct contact membrane distillation were produced from electrospun polystyrene microfibers doped with activated carbon. The addition of activated carbon reduced the hydrophobicity of the fibers. Therefore, ... -
Active agents loaded extracellular matrix mimetic electrospun membranes for wound healing applications
( Editions de Sante , 2021 , Article)Achieving the healing of chronic diabetic ulcers, burn wounds and large traumatic wounds is a major clinical challenge. A variety of approaches have been undertaken to generate skin substitutes, wound healing patches or ... -
Applicable anode based on Co3O4–SrCO3 heterostructure nanorods-incorporated CNFs with low-onset potential for DUFCs
( Springer , 2017 , Article)Besides the high-current density, lower onset potential of urea electrooxidation is key parameter which influences the direct urea fuel cell performance. In the present article, low-onset potential has been reported for ... -
CARBON BASED CONDUCTIVE FIBERS FOR FUEL CELL APPLICATION
(2018 , Master Thesis)A novel catalyst consists of a group of metals (Ni, Co and Cu) deposited on carbon fiber support and was prepared for oxidation using methanol and ethanol in alkaline medium. The carbon fiber support was fabricated by ... -
Chitosan-based electrospun nanofibers for diabetic foot ulcer management; recent advances
( Elsevier , 2023 , Article Review)Diabetic foot ulcer (DFU) healing has long been a major medical challenge. The type of dressing is an essential factor in wound healing, prevention of local infection, and scar formation. Today, smart wound dressings or ... -
Corrosion protection of electrospun PVDF-ZnO superhydrophobic coating
( Elsevier B.V. , 2016 , Article)A one-step electrospinning technique was used to prepare a protective superhydrophobic PVDF–ZnO nanocomposite coating for aluminum against corrosion. The wettability and morphology of the prepared coating surfaces was ... -
CTGF Loaded Electrospun Dual Porous Core-Shell Membrane For Diabetic Wound Healing
( Dove Medical Press Ltd. , 2019 , Article)Purpose: Impairment of wound healing is a major issue in type-2 diabetes that often causes chronic infections, eventually leading to limb and/or organ amputation. Connective tissue growth factor (CTGF) is a signaling ... -
Development of titanium dioxide nanowire incorporated poly(vinylidene fluoride–trifluoroethylene) scaffolds for bone tissue engineering applications
( Springer New York LLC , 2019 , Article)Critical size bone defects that do not heal spontaneously are among the major reasons for the disability in majority of people with locomotor disabilities. Tissue engineering has become a promising approach for repairing ... -
Electrospun chitosan membranes containing bioactive and therapeutic agents for enhanced wound healing
( Elsevier B.V. , 2020 , Article)Electrospinning is one of the most promising techniques for generating porous, nonwoven, and submicron fiber-based membranes for various applications such as catalysis, sensing, tissue engineering and wound healing. Wide ... -
Electrospun nanofibers of PVDF-HFP composites containing magnetic nickel ferrite for energy harvesting application
( Elsevier Ltd , 2020 , Article)Nickel ferrite nanoparticles (NiFe2O4) synthesized by chemical co-precipitation method, are added to poly(vinylidene fluoride-co-hexafluoroproplyene) (PVDF-HFP) in specific concentrations (1, 2, and 3 wt%) and the composite ... -
Electrospun PET-PU scaffolds for vascular tissue engineering
( Institute of Electrical and Electronics Engineers Inc. , 2015 , Conference Paper)The incidence of cardiovascular diseases (CVD) is projected to continuously increase in the coming decades, with a colossal associated cost of treatment. In the US alone, 83.6 million people are estimated to have one or ... -
Electrospun polylactic acid/date palm polyphenol extract nanofibres for tissue engineering applications
( Springer , 2019 , Article)In this study, a set of polylactic acid (PLA)/polyphenol extracted from date palm fruit (DP) blends were prepared by electrospinning process to be used as cell culture scaffolds for tissue engineering applications. For ... -
Engineering of magnetically separable ZnFe2O4@ TiO2 nanofibers for dye-sensitized solar cells and removal of pollutant from water
( Elsevier , 2017 , Article)Abstract In this study, magnetic Zinc Ferrite (ZnFe2O4)@TiO2 nanofibers were prepared by low cost and nontoxic route; hydrothermal technique followed by electrospinning process. The prepared magnetic ZnFe2O4@TiO2 nanofibers ... -
Growth factor loaded in situ photocrosslinkable poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/gelatin methacryloyl hybrid patch for diabetic wound healing
( Elsevier Ltd , 2021 , Article)Management of chronic diabetic ulcers remains as a major challenge in healthcare which requires extensive multidisciplinary approaches to ensure wound protection, management of excess wound exudates and promoting healing. ... -
Growth factor loaded in situ photocrosslinkable poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/gelatin methacryloyl hybrid patch for diabetic wound healing
( Elsevier , 2021 , Article)© 2020 The Authors Management of chronic diabetic ulcers remains as a major challenge in healthcare which requires extensive multidisciplinary approaches to ensure wound protection, management of excess wound exudates and ... -
Humidity sensor based on electrospun MEH-PPV:PVP microstructured composite
( Royal Society of Chemistry , 2016 , Article)The present study demonstrates a solution-processed humidity sensor based on poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene]:polyvinylpyrrolidone (MEH-PPV:PVP) organic microstructured composite thin film. The ... -
Humidity sensor based on poly(lactic acid)/PANI-ZnO composite electrospun fibers
( Royal Society of Chemistry , 2021 , Article)The electrospinning technique has been successfully used to prepared micro-fibers of the poly(lactic acid)/polyaniline–zinc oxide (PLA/PANI–ZnO) composite. The polyaniline–zinc oxide (PANI–ZnO) nanocomposites are synthesized ... -
In situ photopolymerization of acrylamide hydrogel to coat cellulose acetate nanofibers for drug delivery system
( MDPI , 2021 , Article)In this study we developed electrospun cellulose acetate nanofibers (CANFs) that were loaded with a model non-steroidal anti-inflammatory drug (NSAID) (ibuprofen, Ib) and coated with poly(acrylamide) (poly-AAm) hydrogel ... -
Influence of bimetallic nanoparticles composition and synthesis temperature on the electrocatalytic activity of NiMn-incorporated carbon nanofibers toward urea oxidation
( Elsevier , 2018 , Article)High efficiency, cost effectivity and the availability of hydrogen are the advantages of electrolysis as a strategy for urea-containing wastewater treatment. Composition, morphology, and synthesis-temperature distinctly ... -
Influence of nitrogen doping on the electrocatalytic activity of Ni-incorporated carbon nanofibers toward urea oxidation
( Elsevier Ltd , 2017 , Article)Overall, boosting the formation of the active NiOOH layer distinctly improves the electro catalytic activity of nickel-based materials. Moreover, due to the adsorption capacity, the carbonaceous supports improve the ...