TitleAuthorPublication DatePublisherType
    A model for predicting failure of oil pipelines  Senouci, Ahmed; Elabbasy, Mohamed; Elwakil, Emad; Abdrabou, Bassem; Zayed, Tarek2014Taylor & FrancisArticle
    A multi-objective genetic algorithm model for time-cost trade-off analysis of construction projects  Senouci, Ahmed; Al-Derham, Hassan R.2006Civil-Comp PressConference Paper
    Blind identification of the Millikan Library from earthquake data considering soil-structure interaction  Ghahari, S. F.; Abazarsa, F.; Avci, O.; Çelebi, Mehmet; Taciroglu, E.2015John Wiley & Sons, Ltd.Article
    Characteristics of olive mill solid residue and its application in remediation of Pb2+, Cu2+ and Ni2+ from aqueous solution: Mechanistic study  Hawari, A.; Khraisheh, M.; Al-Ghouti, M.A.2014ElsevierArticle
    Classification tree analysis of factors affecting parking choices in Qatar  Shaaban, K.; Pande, A.2015Elsevier LtdArticle
    Combined influence of temperature and flow rate of feeds on the performance of forward osmosis  Hawari, Alaa H.; Kamal, Nagla; Altaee, Ali2016ElsevierArticle
    Comparison of SimTraffic and VISSIM Microscopic Traffic Simulation Tools in Modeling Roundabouts  Shaaban, Khaled; Kim, Inhi2015Elsevier B.V.Conference Paper
    Condition prediction models for oil and gas pipelines using regression analysis  El-Abbasy, M.; Senouci, A.; Zayed, T.; Mirahadi, F.; Parvizsedghy, L.2014American Society of Civil Engineers (ASCE)Article
    Cost optimization of composite beams using genetic algorithms  Senouci, Ahmed B.; Al-Ansari, Mohammed S.2009Elsevier LtdArticle
    Critical factors determining bid/no bid decisions of contractors in Qatar  Jarkas, A.M.; Mubarak, Saleh; Kadri, C.Y2014American Society of Civil Engineers (ASCE)Article
    Developing a framework for calculating LCA normalization factors for the State of Qatar  Attallah, S.O.; Kandil, A.; Senouci, A.; Al-Derham, H.; Cai, H.; El-Gafy, M.2013Canadian Society for Civil EngineeringConference Paper
    Developing a framework for pre-design process simulation for green buildings  Nookala, Srinivasa; Said, Hisham; Kandil, Amr; Cai, Hubo; Al-Derham, Hassan; Senouci, Ahmed; El-Gafy, Mohammed2012American Society of Civil Engineers (ASCE)Conference Paper
    Drift optimization of high-rise buildings in earthquake zones  Al-Ansari, Mohammed; Senouci, Ahmed2011John Wiley & Sons, Ltd.Article
    The Effect of Aluminium Dross on Mechanical and Corrosion Properties of Concrete  Ozerkan, Nesibe; Maki, Omar; Anayeh, Momen; Tangen, Stian; M. Abdullah, Aboubakr2014OMICS InternationalArticle
    Effect of using Cement Kiln Dust as a nano-material on the strength of cement mortars  Alnahhal, Wael; Taha, Ramzi; Al-Nasseri, Hammad; Nishad, Safna2017Springer VerlagArticle
    Estimating the elastic settlement of vertically loaded single piles in rock  Eid, Hisham T.; Shehada, Abdalfatah A.2014Trans Tech PublicationsArticle
    Evaluation of Combined Excavation Waste and Reclaimed Asphalt Pavement Aggregates for Use in Road Bases and Sub-bases  Taha, Ramzi; Sirin, Okan; Sadek, Husam2014OMICS InternationalArticle
    Evidential Reasoning–Based Condition Assessment Model for Offshore Gas Pipelines  Mosleh, Fadi; Zayed, Tarek; El-Abbasy, Mohammed S.2016American Society of Civil Engineers (ASCE)Article
    Experimental investigation of the influence of grain geometry on residual NAPL using synchrotron microtomography  Al-Raoush, Riyadh I.2014Elsevier B.V.Article
    Flexural and interfacial behavior of externally bonded/ mechanically fastened fiber-reinforced polymer-strengthened reinforced concrete beams  Ebead, Usama; Saeed, Huda2014American Concrete InstituteArticle