بحث بسيط
السجلات المعروضة 21 -- 30 من 39
Melt processing and properties of linear low density polyethylene-graphene nanoplatelet composites
(
Elsevier Ltd
, 2016 , Article)
Composites of Linear Low Density Polyethylene (LLDPE) and Graphene Nanoplatelets (GNPs) were processed using a twin screw extruder under different extrusion conditions. The effects of screw speed, feeder speed and GNP ...
Improvement of ternary recycled polymer blend reinforced with date palm fibre
(
Elsevier, Ltd
, 2014 , Article)
This paper investigates the study and preparation of date palm fibre reinforced recycled polymer blend composites. This is the first paper which describes the recycled polymer ternary blends of (1) recycled low density ...
Microstructure evolution and mechanical properties of twinned AZ31 alloy plates at lower elevated temperature
(
Elsevier Ltd
, 2014 , Article)
The AZ31 alloy plates were pre-rolled at room temperature along the transverse direction to introduce extension twinning. The effect of pre-existing twins on the mechanical properties of AZ31 alloy plates at lower elevated ...
Silk as a reinforcement in polymer matrix composites
(2015 , Book chapter)
Natural fibers perform well as reinforcement materials in polymer matrix composites and provide ecological and environmental advantages. Both plant- and animal-based natural fibers have been studied for their mechanical ...
Characterizing biaxially stretched polypropylene/graphene nanoplatelet composites
(
International Committee on Composite Materials
, 2017 , Conference Paper)
During moulding processes such as thermoforming and blow moulding, heated polymer materials are subjected to rapid biaxial deformation as they are drawn into the shape of a mould. It is therefore essential to accurately ...
Grain refining and improving mechanical properties of a warm rolled AZ31 alloy plate
(
Elsevier B.V.
, 2014 , Article)
The mechanical properties of an AZ31 magnesium alloy were improved after warm rolling. The study involved a pre-rolling condition in which the material consisted of twins, playing a key role in recrystallization grain ...
Calorimetric and dynamic mechanical behavior of phase change materials based on paraffin wax supported by expanded graphite
(
Elsevier
, 2015 , Article)
This study addressed the characterization and description of calorimetric and dynamic mechanical properties of phase change materials (PCMs) based on linear low-density polyethylene (LLDPE), paraffin wax (W) and expanded ...
Influence of TiO2 nanoparticles incorporation to friction stir welded 5083 aluminum alloy on the microstructure, mechanical properties and wear resistance
(
Elsevier
, 2017 , Article)
The aim of the current study is to investigate the effect of addition of TiO2 nanoparticles and friction stir welding (FSW) parameter such as number of passes on microstructure, mechanical and tribological properties of ...
Investigation of the physico-mechanical properties of electrospun PVDF/cellulose nanofibers.
(
Wiley
, 2016 , Article)
The electro-activity and mechanical properties of PVDF depends mainly on the b-phase content and degree of crystallinity. In this study, cellulose fibers were used to improve these characteristics. This could be achieved ...
Electrospun PVDF graphene oxide composite fibre mats with tunable physical properties.
(
Springer Verlag
, 2016 , Article)
This article is aimed at a basic physical characterization of electrospun PVDF/graphene oxide (GO) composite non-woven fibre mats. The morphological characterization of the prepared fabrics was performed via SEM investigations. ...