Qatar University Young Scientists Center: المرسلات الحديثة
السجلات المعروضة 301 -- 319 من 319
-
Pedagogical models to implement effective stem research experience programs in high school students
( MDPI , 2021 , Article Review)High school research experience programs (HSREPs) provide opportunities for true science education and expose students to scientific investigations in laboratory settings. Various HSREPs models have been practiced to shape ... -
A distinctive method of online interactive learning in stem education
( MDPI , 2021 , Article)A breakthrough that has occurred in recent years is the emergence of the COVID-19 pandemic. It has affected various sectors of society, including the educational sector. It has prevented students from performing group-oriented ... -
Numerical modeling and performance optimization of carbon-based hole transport layer free perovskite solar cells
( Elsevier , 2022 , Article)Owing to low production cost and ease of processing, hole-transport layer (HTL) free carbon electrode-based perovskite solar cells (c-PSCs) have emerged as a potential photovoltaic (PV) technology. Despite this, c-PCSs ... -
Metal halide-based photodetector using one-dimensional MAPbI3 micro rods
( Springer , 2020 , Article)In the present work, we report the fabrication of a photodetector using methylammonium lead iodide perovskite (MAPbI3) micro rod. Photosensitivity of the Ag/MAPbI3/Ag photodetector has been studied under various light ... -
Effect of illumination and applied potential on the electrochemical impedance spectra in triple cation (FA/MA/Cs) 3D and 2D/3D perovskite solar cells
( Elsevier , 2021 , Article)Even though there has been numerous works performed based on electrochemical impedance spectroscopy (EIS) of perovskite solar cells (PSCs), however, many aspects of the obtained EI spectra are yet to be fully grasped. ... -
Effect of the temperature on the passivity of the modified martensitic stainless steels
( Taylor and Francis Group , 2022 , Article)The limits and nature of the passive behavior exhibited by modified martensitic stainless steels (MMSS) is studied in brine solutions at different temperatures using electrochemical methods and the point defect model (PDM), ... -
Promising transparent and flexible thermoelectric modules based on p-type CuI thin films—A review
( Elsevier , 2022 , Article Review)The state-of-the-art thermoelectric technology owns a unique capability of direct, noise-free, and efficient conversion of waste heat into valuable electricity. The conventional thermoelectric generators are complex and ... -
Effect of cold and hot compactions on corrosion behavior of p- and n-type bismuth telluride-based alloys developed through microwave sintering process
( Elsevier , 2023 , Article)Bismuth Telluride (BiTe) based p-type and n-type alloys exhibit superior thermoelectric (TE) performance covering energy requirements for specialized and home utilization. The main challenge nowadays is the sustainability ... -
A lightweight neural network with multiscale feature enhancement for liver CT segmentation
( Nature Research , 2022 , Article)Segmentation of abdominal Computed Tomography (CT) scan is essential for analyzing, diagnosing, and treating visceral organ diseases (e.g., hepatocellular carcinoma). This paper proposes a novel neural network (Res-PAC-UNet) ... -
Hierarchical BaTiO3/NiFe2O4 nanocomposite as an efficacious photoanode for photoelectrochemical water splitting
( Elsevier , 2022 , Article)Photocatalysis of water for the production of oxygen and hydrogen is one of the most important development in the drive for clean energy, and it has received a lot of attention because it is a green and easy step to generate ... -
Numerical simulation to optimize the efficiency of HTM-free perovskite solar cells by ETM engineering
( Elsevier , 2023 , Article)Perovskite solar cells based on carbon electrodes (c-PSCs) without a hole transport material (HTM) have gained considerable interest owing to their cost-effective and simplified structure. However, their application is ... -
Study on the corrosion behavior of polymeric nanocomposite coatings containing halloysite nanotubes loaded with multicomponent inhibitor
( Elsevier B.V. , 2022 , Article)In the present study, the halloysite nanotubes (HNTs) were loaded with a multicomponent inhibitor (LHNT) comprising mainly benzotriazole (BTA), sodium benzoate (SB), and lauric acid (LA) via the vacuum cycling method. The ... -
TiO2 encrusted MXene as a High-Performance anode material for Li-ion batteries
( Elsevier B.V. , 2022 , Article)TiO2 has the potential to be a viable anode material for high-power lithium-ion batteries (LIBs). However, the lower electronic conductivity of TiO2 limits its practical applications. Here, the synthesis of novel TiO2 ... -
Humidity sensor based on poly(lactic acid)/PANI-ZnO composite electrospun fibers
( Royal Society of Chemistry , 2021 , Article)The electrospinning technique has been successfully used to prepared micro-fibers of the poly(lactic acid)/polyaniline–zinc oxide (PLA/PANI–ZnO) composite. The polyaniline–zinc oxide (PANI–ZnO) nanocomposites are synthesized ... -
Low-toxic, earth-abundant nanostructured materials for thermoelectric applications
( MDPI AG , 2021 , Article)This article presents recent research directions in the study of Earth-abundant, cost-effective, and low-toxic advanced nanostructured materials for thermoelectric generator (TEG) applications. This study’s critical aspect ... -
Effect of sulfonated poly (ether ether ketone) on the sensitivity of polyvinylidene fluoride-based resistive humidity sensors
( Elsevier Ltd , 2020 , Article)We have investigated the effect of sulfonated poly (ether ether ketone) (SPEEK) on the thermal stability, hydrophilicity, and sensitivity of polyvinylidene fluoride (PVDF) films based resistive humidity sensors. The blended ... -
Study of polyaniline-silver nanocomposite as humidity sensor
( Hamad bin Khalifa University Press (HBKU Press) , 2018 , Conference)Study of polyaniline-silver nanocomposite as humidity sensor J. Bhadra, A. Popelka, N. J. Al-Thani, A. Abdulkareem Center for Advanced Materials, Qatar University, Qatar Abstract In this piece of work focus on fabrication ... -
Optimum sintering method and temperature for cold compact Bismuth Telluride pellets for thermoelectric applications
( Elsevier , 2021 , Article)This work intends to investigate the optimum sintering method and temperature that can improve the efficiency of bismuth telluride cold compact pellets, for the thermoelectric applications. Different p-type and n-type ... -
QUYSC STEM Digilearning Model
( Qatar University Press , 2021 , Poster)Covid-19 and the unprecedented shift in educational delivery, has revealed multiple perforations in the science-learning pedagogies. The technological replacements for a physical presence of an instructor and peer collaborated ...
