بحث بسيط
السجلات المعروضة 21 -- 30 من 35
Investigation of the effect of Al-8B master alloy and strain-induced melt activation process on dry sliding wear behavior of an Al–Zn–Mg–Cu alloy
(
Elsevier, Ltd
, 2014 , Article)
Abstract This study was undertaken to investigate the influence of Al–8B master alloy and modified strain-induced melt activation process on the structural characteristics and dry sliding wear behavior of Al–12Zn–3Mg–2.5Cu ...
Simulated annealing with auxiliary knowledge for process planning optimization in reconfigurable manufacturing
(
Elsevier
, 2012 , Article)
In this paper, three simulated annealing based algorithms that exploit auxiliary knowledge in different ways are devised and employed to handle a manufacturing process planning problem for reconfigurable manufacturing. ...
An investigation into hybrid carbon/glass fiber reinforced epoxy composite automotive drive shaft
(
Elsevier
, 2011 , Article)
This paper examines the effect of fiber orientation angles and stacking sequence on the torsional stiffness, natural frequency, buckling strength, fatigue life and failure modes of composite tubes. Finite element analysis ...
Porosity effects on post-buckling behavior of geometrically imperfect metal foam doubly-curved shells with stiffeners
(
Techno-Press
, 2020 , Article)
This papers studies nonlinear stability and post-buckling behaviors of geometrically imperfect metal foam doubly-curved shells with eccentrically stiffeners resting on elastic foundation. Metal foam is considered as porous ...
Analyzing exact nonlinear forced vibrations of two-phase magneto-electro-elastic nanobeams under an elliptic-type force
(
Techno-Press
, 2020 , Article)
The present paper deals with analyzing nonlinear forced vibrational behaviors of nonlocal multi-phase piezo-magnetic beam rested on elastic substrate and subjected to an excitation of elliptic type. The applied elliptic ...
Magneto-electric effects on nonlocal nonlinear dynamic characteristics of imperfect multi-phase magneto-electro-elastic beams
(
Elsevier
, 2020 , Article)
This paper studies nonlinear dynamic characteristics of a nonlocal two-phase piezo-magnetic beam including geometric imperfections by considering piezoelectric reinforcement scheme. The piezoelectric reinforcement can cause ...
Economic cost models of integrated APC controlled SPC charts
(
Taylor & Francis
, 2012 , Article)
In this paper, an economic cost model is proposed for processes integrating both automatic process control (APC) and statistical process control (SPC) for quality monitoring and control. Both the special cause and common ...
Adaptive cumulative sum charts with the adaptive runs rule
(
Taylor & Francis
, 2013 , Article)
Adaptive cumulative sum (ACUSUM) charts, which adjust the reference value dynamically based on estimated shift size, provide good performance in detecting a range of mean shifts. However, when the range is wide, ACUSUM may ...
ISO 9000 performance among the Malaysian companies: The effects of motives
(
Inderscience Publishers
, 2009 , Article)
This paper presents the results of a study to identify the real motives behind ISO 9000 Certification. Towards this goal, a survey of some 300 ISO 9000 certified companies has been carried out for Malaysian manufacturing ...
An adaptive step-down procedure for fault variable identification
(
Taylor & Francis
, 2015 , Article)
In a process with a large number of process variables (high-dimensional process), identifying which variables cause an out-of-control signal is a challenging issue for quality engineers. In this paper, we propose an adaptive ...