Mechanical & Industrial Engineering: المرسلات الحديثة
السجلات المعروضة 661 -- 680 من 1461
-
Impact of COVID-19 Pandemic on Qatar Electricity Demand and Load Forecasting: Preparedness of Distribution Networks for Emerging Situations
( MDPI , 2022 , Article)The COVID-19 pandemic has brought several global challenges, one of which is meeting the electricity demand. Millions of people are confined to their homes, in each of which a reliable electricity supply is needed, to ... -
Recent Progress in WS2 -Based Nanomaterials Employed for Photocatalytic Water Treatment
( MDPI , 2022 , Article Review)Water pollution is one of the most serious environmental issues globally due to its harmful consequences on the ecosystem and public health. Various technologies have been developed for water treatment such as photocatalysis, ... -
Fast and Scalable Synthesis of LiNi0.5Mn1.5O4 Cathode by Sol-Gel-Assisted Microwave Sintering
( John Wiley and Sons Inc , 2021 , Article)High-voltage spinel LiNi0.5Mn1.5O4 (LNMO) is a promising cathode material for high-energy-density and high-power-density lithium-ion batteries (LIBs). The high cost of the currently available LIBs needs to be addressed ... -
A focused review on smart carriers tailored for corrosion protection: Developments, applications, and challenges
( Elsevier B.V. , 2021 , Article Review)Steel-made infrastructures have been expanding at an incredible rate worldwide and are critical for the expansion and operation of countless industries. Steel is susceptible to corrosion failures, particularly in aggressive ... -
Effect of concentration of TiC on the properties of pulse electrodeposited Ni-P-TiC nanocomposite coatings
( Elsevier Ltd , 2021 , Article)Ni-P/TiC nanocomposite coatings, including different concentrations of TiC nanoparticles (TCNPs) were developed on HSLA (high strength low alloy steel) substrates through the pulse electrodeposition (PED) process. The ... -
Effect of Inconel625 particles on the microstructural, mechanical, and thermal properties of Al-Inconel625 composites
( Elsevier Ltd , 2020 , Article)This research work investigates the effect of concentration of Inconel625 particles on the microstructural, mechanical, and thermal properties of Al-Inconel625 composites. The Al-Inconel625 composites containing varying ... -
Improving mechanical, thermal and damping properties of niti (Nitinol) reinforced aluminum nanocomposites
( MDPI AG , 2020 , Article)In the present study, Ni50Ti50 (NiTi) particle reinforced aluminum nanocomposites were fabricated using microwave sintering and subsequently hot extrusion. The effect of NiTi (0, 0.5, 1.0, and 1.5 vol %) content on the ... -
Improved properties of Al-Si3N4 nanocomposites fabricated through a microwave sintering and hot extrusion process
( Royal Society of Chemistry , 2017 , Article)In this study, nano-sized Si3N4 (0, 0.5, 1.0 and 1.5 vol%)/Al composites were fabricated using a powder metallurgy method involving microwave sintering technique followed by hot extrusion. The influence of Si3N4 content ... -
Novel Ni-B/AlN nanocomposite coatings for oil and gas industry
( National Assoc. of Corrosion Engineers International , 2018 , Conference)Corrosion is a major cause of materials and equipment failure in the oil and gas industry, and its prevention is crucial to ensure reliability of the assets. Towards, this goal, Ni-B/AlN nanocomposite coatings were synthesized ... -
Effect of the modified hybrid particle on the corrosion inhibition performance of polyolefin based coatings for carbon steel
( Elsevier B.V. , 2022 , Article)This work reports the corrosion inhibition performance of modified hybrid particles reinforced into polyolefin matrix. The cerium oxide coated zinc oxide hybrid particles (CeO2@ZnO) were synthesized via a chemical precipitation ... -
Investigation of gas-liquid flow using electrical resistance tomography and wavelet analysis techniques for early kick detection
( American Society of Mechanical Engineers (ASME) , 2021 , Conference)Gas kick is a well control problem and is defined as the sudden influx of formation gas into the wellbore. This sudden influx, if not controlled, may lead to a blowout problem. An accidental spark during a blowout can lead ... -
Comprehensive assessment and evaluation of correlations for gas-oil ratio, oil formation volume factor, gas viscosity, and gas density utilized in gas kick detection
( Elsevier B.V. , 2021 , Article)For reliable gas kick detection modeling and simulation, the PVT properties of the gas must be predicted accurately. The property correlations available in open literature are developed mostly for certain regions and ... -
CHAPTER 4: Graphitic Carbon Nitride Nanostructures as Potent Catalysts for Water Splitting: Theoretical Insights
( Royal Society of Chemistry , 2021 , Book chapter)The water-splitting reaction is a highly promising green and sustainable energy source. However, finding effective catalysts for both water reduction and oxidation is an unnerving challenge. Graphitic carbon nitride (gCN) ... -
Underlying Mechanisms of Transit-Oriented Development: A Conceptual System Dynamics Model in Qatar
( MDPI , 2022 , Article)Transit-Oriented Development (TOD) is an urban planning approach that facilitates the achievement of sustainable development goals from an urban planning and transportation perspective. Developed countries are moving rapidly ... -
Enhancing the electrocatalytic properties of LaMnO3 by tuning surface oxygen deficiency through salt assisted combustion synthesis
( Elsevier B.V. , 2021 , Article)In this work, we report a detailed investigation on the salt assisted combustion synthesis of LaMnO3 perovskite catalyst for improving the electrochemical properties through agglomeration control and enhanced oxygen defects ... -
Single step synthesis of porous NiCoO2 for effective electrooxidation of glycerol in alkaline medium
( Electrochemical Society Inc. , 2018 , Article)Herein, we report the electrooxidation of glycerol in alkaline media in presence of highly active and durable NiCoO2 catalyst synthesized using single step solution combustion synthesis (SCS) and compare its activity with ... -
Combustion synthesized nickel-cobalt catalyst deactivation by coking during ethanol decomposition reaction
( American Institute of Chemical Engineers , 2019 , Conference)In this work, we report the catalytic dehydrogenation of ethanol over porous cobalt oxide and nickel-cobalt bimetal oxide (NiCoO2). Catalyst deactivation and the nature of carbon formation on these two catalysts are ... -
Cellulose assisted combustion synthesis of nanoparticles for catalytic applications
( AIChE , 2017 , Conference)[No abstract available] -
Study of ethanol decomposition mechanism over combustion synthesized bimetallic Cu-Co nanoparticles
( AIChE , 2018 , Conference)[No abstract available] -
Characterization and In vitro biocompatibility analysis of nanocellulose scaffold for tissue engineering application
( Springer Science and Business Media B.V. , 2022 , Article)Tissue engineering aims to exploit the regenerative capacity of cells and connect the inherent ability of the body to repair and regenerate. Cells are seeded onto a porous three-dimensional scaffold in tissue engineering, ...
