Browsing Center for Advanced Materials Research by Title
Now showing items 345-364 of 1304
-
Effect of Inconel625 particles on the microstructural, mechanical, and thermal properties of Al-Inconel625 composites
( Elsevier Ltd , 2020 , Article)This research work investigates the effect of concentration of Inconel625 particles on the microstructural, mechanical, and thermal properties of Al-Inconel625 composites. The Al-Inconel625 composites containing varying ... -
Effect of initial and final curing on performance of concrete in hot and arid climates
( Wiley-Blackwell , 2019 , Article)The effect of initial and final curing conditions of ordinary concrete cast in regions with harsh environmental conditions on the compressive strength and microstructure of concrete is investigated in this research. More ... -
Effect of layered silicates on the thermal stability of PCL/PLA microfibrillar composites
( Elsevier , 2016 , Article)This paper reports on an investigation of the influence of the presence of two different clays, Cloisite 15A and Cloisite 30B, and fibre drawing on the degradation behaviour and kinetics of PCL/PLA composites. It was ... -
Effect of microwave sintering on the crystal domain and electrical properties of TiO2 nanoparticles
( Springer Netherlands , 2017 , Article)We report the effect of microwaves sintering on the crystal domain and electrical properties of TiO2 nanoparticles. Commercially available TiO2 nanoparticles of 25 nm size were coated on ITO (indium tin oxide) substrates, ... -
Effect of nanostructured polyhedral oligomeric silsesquioxane on the physical properties of poly(vinyl alcohol)
( John Wiley and Sons Inc. , 2017 , Article)An effective amphiphilic polyhedral oligomeric silsesquioxane (POSS) encapsulated poly(vinyl alcohol) (PVA) nanocomposite was successfully fabricated by solution blending method. Anionic octa(tetramethylammonium) (Octa-TMA) ... -
Effect of Operational Parameters on the Behavior of Phosphorus and Sulfur in Aluminum Reduction
( John Wiley & Sons, Inc. , 2015 , Book chapter) -
Effect of PEG functionalized carbon nanotubes on the enhancement of thermal and physical properties of nanofluids
( Elsevier Inc. , 2017 , Article)In this study, pristine carbon nanotubes and polyethylene glycol functionalized carbon nanotubes (CNT-PEG) have been used to enhance the heat capacity, viscosity, thermal conductivity, heat transfer rate and pressure drop ... -
Effect of plain strain deformation on grain strengthening mechanism of Fe-Al2O3 metal matrix nanocomposites
( SAGE Publications Ltd , 2021 , Article)The present paper reports the effect of plain strain deformation on grain strengthening mechanism of iron (Fe) - alumina (Al2O3) Metal Matrix Nanocomposites (MMNCs) fabricated through powder metallurgical (P/M) processing. ... -
Effect of plasma treatment on accelerated pla degradation
( BME-PT and GTE , 2021 , Article)Poly(lactic acid) (PLA) has been found to be important in various applications, such as in the medical, pharma-ceutical, and packaging industries. However, the long-term associated degradation process of PLA is a limiting ... -
Effect of plasma treatment on accelerated pla degradation
( BME-PT and GTE , 2021 , Article)Poly(lactic acid) (PLA) has been found to be important in various applications, such as in the medical, pharma-ceutical, and packaging industries. However, the long-term associated degradation process of PLA is a limiting ... -
Effect of poly ethylene glycol (PEG) on structural, thermal and photoluminescence properties of CdO nanoparticles for optoelectronic applications
( Elsevier Ltd , 2019 , Conference Paper)Current study deals with capped/uncapped Cadmium Oxide Nanoparticles (CdO NPs) synthesized by chemical precipitation technique. Structural, morphological, thermal and optical properties of these samples were investigated ... -
Effect of poly(ε-caprolactone) and titanium (IV) dioxide content on the UV and hydrolytic degradation of poly(lactic acid)/poly(ε-caprolactone) blends
( John Wiley and Sons Inc , 2021 , Article)The effect of accelerated weathering degradation on the properties of poly(lactic acid) (PLA)/poly(ε-caprolactone) (PCL) blends and PLA/PCL/titanium (IV) dioxide (TiO2) nanocomposites are presented in this paper. The results ... -
Effect of preparation method on the properties of poly(methyl methacrylate)/mesoporous silica composites
( Springer Nature , 2019 , Article)The preparation method of a polymer composite and the filler loading are amongst the factors that influence the properties of the final composites. This article studies the effect of these factors on the thermal stability ... -
Effect of reinforcement concentration on the properties of hot extruded Al-Al2O3 composites synthesized through microwave sintering process
( Elsevier Ltd , 2017 , Article)In this study, Aluminum matrix composite reinforced with 5, 10 and 15 vol% Al2O3 particles were fabricated using microwave assisted rapid sintering technique followed by hot extrusion. The effect of concentration of Al2O3 ... -
Effect of reinforcement concentration on the properties of hot extruded Al-Al2O3 composites synthesized through microwave sintering process
( Elsevier Ltd , 2017 , Article)In this study, Aluminum matrix composite reinforced with 5, 10 and 15 vol% Al2O3 particles were fabricated using microwave assisted rapid sintering technique followed by hot extrusion. The effect of concentration of Al2O3 ... -
Effect of short fibres in the mechanical properties of geopolymer mortar containing oil-contaminated sand
( MDPI , 2021 , Article)Sand contaminated with crude oil is becoming a major environmental issue around the world, while at the same time, fly ash generated by coal-fired power stations is having a detrimental effect on the environment. Previous ... -
Effect of Silicon Nitride and Graphene Nanoplatelets on the Properties of Aluminum Metal Matrix Composites
( Qatar University Press , 2021 , Poster)This research work aims at investigating the influence of a fixed content of silicon nitride (Si3N4) and varied contents of graphene nanoplatelets (GNPs) on the physical and mechanical properties of Al-Si3N4-GNPs composites. ... -
Effect of silicon nitride and graphene nanoplatelets on the properties of aluminum metal matrix composites
( MDPI AG , 2021 , Article)This research work aims at investigating the influence of a fixed content of silicon nitride (Si3N4) and varied contents of graphene nanoplatelets (GNPs) on the physical (density, structural, morphological) and mechanical ... -
Effect of sintering temperature on the structural and magnetic properties of MgFe2O4 ceramics prepared by spark plasma sintering
( Elsevier Ltd , 2016 , Article)Spark plasma sintering (SPS) is a powerful technique to produce fine grain dense ferrite at low temperature. This work was undertaken to study the effect of sintering temperature on the densification, microstructures and ... -
Effect of sulfonated poly (ether ether ketone) on the sensitivity of polyvinylidene fluoride-based resistive humidity sensors
( Elsevier Ltd , 2020 , Article)We have investigated the effect of sulfonated poly (ether ether ketone) (SPEEK) on the thermal stability, hydrophilicity, and sensitivity of polyvinylidene fluoride (PVDF) films based resistive humidity sensors. The blended ...