بحث بسيط
السجلات المعروضة 61 -- 70 من 72
Enhanced electrochemical and mechanical performance of BN reinforced Ni-P based nanocomposite coatings
(
Elsevier
, 2022 , Article)
Adequate corrosion protection and improved mechanical properties are necessary requirements to overcome operational costs in the industries. Ni-P based coatings are known to possess better superior corrosion resistance ...
Probing into the properties of B4C reinforced nickel phosphorus-based nanocomposite coating
(
Elsevier
, 2022 , Article)
Nickel-based coatings are well known for their good corrosion resistance performance. However, these materials suffer from inferior mechanical properties that limit their wider application. This work investigates the ...
Breath Analysis for the in Vivo Detection of Diabetic Ketoacidosis
(
American Chemical Society
, 2022 , Article)
Human breath analysis of volatile organic compounds has gained significant attention recently because of its rapid and noninvasive potential to detect various metabolic diseases. The detection of ketones in the breath and ...
Nanostructural synergism as Mn-N-C channels in manganese (IV) oxide and fluffy g-C3N4 layered composite with exceptional catalytic capabilities
(
Academic Press Inc.
, 2022 , Article)
The avenues of catalysis and material science are always accepted and it is hoped that a state-of-the-art catalyst with exceptional intrinsic redox characteristics would be produced. This study focused on developing a ...
Thermal behavior and post-heating fracture characteristics of polypropylene microfiber-reinforced geopolymer binders
(
Elsevier
, 2022 , Article)
This paper investigated the post-heating behavior of fly ash-based geopolymer binders reinforced with polypropylene (PP) microfibers. Geopolymer binders with different fiber contents including 0%, 0.05%, 0.1%, and 0.2% by ...
Ambient and Heat-Cured Geopolymer Composites: Mix Design Optimization and Life Cycle Assessment
(
Multidisciplinary Digital Publishing Institute (MDPI)
, 2022 , Article)
The feasibility of producing sustainable cement-free composites and its environmental impact were investigated in this research. Experimental parametric evaluation was carried out in this regard to explore the optimum mix ...
Novel Slippery Liquid-Infused Porous Surfaces (SLIPS) Based on Electrospun Polydimethylsiloxane/Polystyrene Fibrous Structures Infused with Natural Blackseed Oil
(
MDPI
, 2022 , Article)
Hydrophobic fibrous slippery liquid-infused porous surfaces (SLIPS) were fabricated by electrospinning polydimethylsiloxane (PDMS) and polystyrene (PS) as a carrier polymer on plasmatreated polyethylene (PE) and polyurethane ...
Correction: Pd/Ni-metal–organic framework-derived porous carbon nanosheets for efficient CO oxidation over a wide pH range
(
Royal Society of Chemistry
, 2022 , Article)
The authors regret that one of the funders of this work was omitted in the Acknowledgements section of the original publication. The correct acknowledgements are as follows: This work was supported by the Qatar University ...
Effect of bond enhancement using carbon nanotubes on flexural behavior of RC beams strengthened with externally bonded CFRP sheets
(
Springer Nature
, 2022 , Article)
This paper studied the effect of incorporation of carbon nanotubes (CNTs) in carbon fiber reinforced polymer (CFRP) on strengthening of reinforced concrete (RC) beams. The RC beams were prepared, strengthened in flexure ...
Mechanical and Electromagnetic Properties of Self-Compacted Geopolymer Concretes With Nano Silica and Steel Fiber Additives
(
Institute of Electrical and Electronics Engineers Inc. (IEEE)
, 2022 , Article)
Mechanical and electromagnetic properties (over 2-16 GHz) of self-compacted geopolymer concrete (SCGC) samples with different amounts of nanosilica (NS) and steel-fiber (SF) have been examined. From the mechanical tests, ...