بحث بسيط
السجلات المعروضة 71 -- 80 من 536
The effect of expanded graphite on the flammability and thermal conductivity properties of phase change material based on PP/wax blends
(
Springer
, 2015 , Article)
The study reports on the flammability, thermal stability, impact properties and thermal conductivity of shape-stabilized phase change materials based on a soft Fischer–Tropsch paraffin wax blended with polypropylene (PP). ...
Morphology and thermal degradation studies of melt-mixed PLA/PHBV biodegradable polymer blend nanocomposites with TiO2 as filler.
(
Wiley
, 2015 , Article)
The morphology and thermal stability of melt-mixed poly(lactic acid) (PLA)/poly(hydroxybutyrate-co-valerate) (PHBV) blends and nanocomposites with small amounts of TiO2 nanoparticles were investigated. PLA/PHBV at 50/50 ...
Editorial: Using thermogravimetric analysis to determine polymer thermal stability: Relevance of changes in onset temperature of mass loss
(
Budapest University of Technology
, 2015 , Article)
Editorial
Phase change materials based on high-density polyethylene filled with microencapsulated paraffin wax
(
Elsevier Ltd
, 2014 , Article)
A modified in situ polymerization microencapsulation procedure for the preparation of microcapsules with paraffin wax cores (43 wt.%) and melamine–formaldehyde resin shells having a uniform size distribution and a spherical ...
A review on electrospun bio-based polymers for water treatment
(
Budapest University of Technology
, 2015 , Article)
Over the past decades, electrospinning of biopolymers down to nanoscale garnered much interest to address most of the millennia issues related to water treatment. The fabrication of these nanostructured membranes added a ...
Morphology and thermal degradation studies of melt-mixed poly(hydroxybutyrate-co-valerate) (PHBV)/poly(ε-caprolactone) (PCL) biodegradable polymer blend nanocomposites with TiO2 as filler
(
Springer
, 2015 , Article)
The morphology, thermal stability and thermal degradation kinetics of melt-mixed poly(hydroxybutyrateco-valerate) (PHBV)/poly(e-caprolactone) (PCL) blends filled with small amounts of titanium(IV)oxide (TiO2) nanoparticles ...
Dynamic mechanical properties of PLA/PHBV, PLA/PCL, PHBV/PCL blends and their nanocomposites with TiO2 as nanofiller
(
Elsevier
, 2015 , Article)
The effect of blending and the addition of small amounts of TiO2 nanoparticles on the dynamic mechanical properties of PLA/PHBV, PLA/PCL and PHBV/PCL blends is reported in this paper. The storage modulus of the PLA/PHBV ...
Effect of surfactant and radiation treatment on the morphology and properties of PP/EG composites
(
Springer
, 2015 , Article)
The effects of surfactant and electron beam (EB) radiation treatment on the morphology and properties of polypropylene (PP)/expanded graphite (EG) composites were investigated. Surfactant treatment and sonication of
EG ...
Prediction of the mechanical properties of copper powder-filled low-density polyethylene composites. A comparison between the ANN and theoretical models
(
Begell House
, 2015 , Article)
In the present study, the mechanical properties of copper (Cu) powder-filled low-density polyethylene
(LDPE) composites are predicted by using artificial neural networks (ANNs) as a function of
the filler concentration. ...
Preparation of multiphase poly(styrene-co-butyl acrylate)/wax-clay nanocomposites via miniemulsion polymerization
(
AD Publications
, 2015 , Article)
In the presence of different wax-clay nanocomposites concentrations, poly(styrene-co-butyl acrylate) P(S-co-BA) copolymers were prepared via free-radical random copolymerization of styrene and butyl acrylate in miniemulsion. ...