Search
Now showing items 91-100 of 103
Dilution of seawater using dewatered construction water in a hybrid forward osmosis system
(
Elsevier Ltd
, 2018 , Article)
In this study, dewatered construction water was used for the first time as the feed solution in a combined pretreatment-forward osmosis process to dilute seawater (i.e. draw solution) for further desalination. It was found ...
Influence of TiO2 nanoparticles on the crystallization behaviour and tensile properties of PLA/TiO2, PCL/TiO2 and PLA/PCL/TiO2 nanocomposites.
(
Springer Verlag
, 2018 , Article)
This paper investigated the influence of TiO2 nanoparticles on the morphologies, as well as crystallization behaviour and kinetics, of neat PLA and PCL, and of these polymers in different PLA/PCL blends. We used transmission ...
Properties enhancement of Ni-P electrodeposited coatings by the incorporation of nanoscale Y 2 O 3 particles
(
Elsevier B.V.
, 2018 , Article)
In this study the influence of nanoscale Y 2 O 3 particles on structural, morphological, mechanical and the elemental composition of Ni-P coatings have been investigated using scanning electron microscopy (SEM), microhardness, ...
Mineralization of dichloromethane using solar-oxidation and activated TiO2: Pilot scale study
(
Elsevier Ltd
, 2018 , Article)
The oxidation of gaseous dichloromethane (DCM) by advanced oxidation technology, advanced solar oxidation technology, biological treatment, and the combination of solar advanced oxidation technology and biological treatment ...
Polymerization of 3-cyanopropyl (triethoxy) silane: A kinetic study using gas chromatography
(
John Wiley and SonsInc.
, 2018 , Article)
Gas chromatography (GC) was used to study the kinetics of the 3-cyanopropyl triethoxysilane (CTES) polymerization. The reaction is a consecutive complex reaction that depends mainly on the kinetics of the first hydrolyzed ...
Enhancing compressive, tensile, thermal and damping response of pure Al using BN nanoparticles
(
Elsevier Ltd
, 2018 , Article)
In the present study, aluminum based metal matrix composites containing various amounts of boron nitride (BN) nanoparticulates (0, 0.5, 1.0 and 1.5 vol.%) were fabricated by using the powder metallurgy (PM) technique ...
Scanning Electron Microscopic Studies of Microwave Sintered Al-SiC Nanocomposites and Their Properties
(
Hindawi Limited
, 2018 , Article)
Al-metal matrix composites (AMMCs) reinforced with diverse volume fraction of SiC nanoparticles were synthesized using microwave sintering process. The effects of the reinforcing SiC particles on physical, microstructure, ...
Microstructure and Mechanical Behavior of Microwave Sintered Cu50Ti50 Amorphous Alloy Reinforced Al Metal Matrix Composites
(
Minerals, Metals and Materials Society
, 2018 , Article)
In the present work, Al metal matrix composites reinforced with Cu-based (Cu50Ti50) amorphous alloy particles synthesized by ball milling followed by a microwave sintering process were studied. The amorphous powders of ...
TiO2/Halloysite hybrid filler reinforced epoxy nanocomposites
(
John Wiley and SonsInc.
, 2018 , Article)
TiO2 nanoparticles and Halloysite nanotubes were used together to modify epoxy matrix. They were introduced into the matrix using two different approaches: (a) both TiO2 nanoparticles and Halloysite nanotubes were incorporated ...
Kinetic studies of POSS–DGEBA precursors derived from monoamine functional POSS using dynamic dielectric sensing and nuclear magnetic resonance
(
John Wiley and Sons Inc.
, 2018 , Article)
Incorporation of pre‐reacted monofunctional polyhedral oligomeric silsesquioxane (POSS)–epoxy adducts dramatically improves dispersion of POSS in epoxy–amine networks. The relationship between reaction kinetics and mechanism ...