Search
Now showing items 81-90 of 496
Effect of reinforcement concentration on the properties of hot extruded Al-Al2O3 composites synthesized through microwave sintering process
(
Elsevier Ltd
, 2017 , Article)
In this study, Aluminum matrix composite reinforced with 5, 10 and 15 vol% Al2O3 particles were fabricated using microwave assisted rapid sintering technique followed by hot extrusion. The effect of concentration of Al2O3 ...
Effect of microwave sintering on the crystal domain and electrical properties of TiO2 nanoparticles
(
Springer Netherlands
, 2017 , Article)
We report the effect of microwaves sintering on the crystal domain and electrical properties of TiO2 nanoparticles. Commercially available TiO2 nanoparticles of 25 nm size were coated on ITO (indium tin oxide) substrates, ...
Surface engineering of the PLA films for fabricating dexterous humidity sensors
(
Springer New York LLC
, 2018 , Article)
This study presents the surface engineering of the thin films of a biodegradable polymer, poly lactic acid (PLA), for its application in moisture/humidity sensors. The PLA films were deposited on the comb-like pre-patterned ...
Recent advances in corrosion resistant superhydrophobic coatings
(
Walter de Gruyter GmbH
, 2018 , Article Review)
Extreme water-repellent (superhydrophobic) coatings with water contact angle higher than 150° have caught the attention of corrosion researchers in the last decade as they can be used to protect metals and alloys against ...
Thermal and mechanical properties of injection molded recycled high density polyethylene blends with virgin isotactic polypropylene
(
Elsevier, Ltd
, 2013 , Article)
Polymer blending has become an important field in polymer research and especially in the area of recycling. In this research the target was to reduce the polymer waste problem. Therefore, recycled high density polyethylene ...
The role of clay modifier on cure characteristics and properties of epoxy/clay/carboxyl-terminated poly(butadiene-co-acrylonitrile) (CTBN) hybrid
(
Taylor and Francis Ltd.
, 2017 , Article)
Epoxy/clay/carboxyl-terminated poly(butadiene-co-acrylonitrile) (CTBN) hybrids were prepared with two different organically modified clays. Octadecyl amine and trimethyl stearyl ammonium-modified nanoclays (Nanomer I.30E ...
DC conductivity and Seebeck coefficient of nonstoichiometric MgCuZn ferrites
(
Walter de Gruyter GmbH
, 2017 , Article)
Nonstoichiometric series of Mg0.5-xCuxZn0.5Fe1.9O4-? where x = 0.0, 0.1, 0.15, 0.2 and 0.25 has been synthesized by conventional solid state reaction route. The single phase spinel structure of the double sintered ferrites ...
Modeling polymeric gels: The role of chain flexibility on the structure of physical gels
(
BME-PT and GTE
, 2017 , Article)
Using molecular dynamics simulations and a simple model for chain molecules we study the gel formation under different conditions. The main characteristic of the model is the short attractive range of the non-bonding ...
On secure communication over the Z-Channel
(
Institute of Electrical and Electronics Engineers Inc.
, 2017 , Conference Paper)
The discrete memoryless Z-Channel (DM-ZC) with a confidential cross-message is considered. Three messages are transmitted; encoder 1 transmits one message to be decoded by decoder 1. Encoder 2 transmits two messages, the ...
Effect of ambient temperature on the efficiency of the PCPDTBT: PC71BM BHJ solar cells
(
Springer Verlag
, 2017 , Article)
In this research article, the influence of environment temperature on the performance of the organic bulk heterojunction organic solar cells has been investigated. We describe the effect of ambient temperature on the ...