Center for Advanced Materials Research: Recent submissions
Now showing items 741-760 of 1482
-
Photocatalytic, antibacterial and electrochemical properties of novel rare earth metal oxides-based nanohybrids
( KeAi Communications Co. , 2020 , Article)Mixed metal oxide nanocomposites (rare earth-based) have become irreplaceable and tend to display great functioning in all kinds of arenas like as photocatalytic, electrochemical, and biological. NiO-CGSO [NiO-Ce0.8Gd0.2 ... -
Synthesis and characterization of crystalline perfection on L-Lysine co-doping glycine barium chloride/C6H14N2O2 (L-LGBCAC) single crystal for NLO materials
( Elsevier Ltd , 2020 , Conference)The aim on l-Lysine single crystal has been developed by the novel organic nonlinear optical (NLO) materials. The l-Lysine with and without Co-Doped Glycine Barium Chloride (GBC)/C6H14N2O2 (Amino acid – AC) was grown of ... -
Experimental investigation on solar still with nanomaterial and dripping arrangement
( Bellwether Publishing, Ltd. , 2020 , Article)The scarcity of potable water for drinking purpose is everywhere in the world. The solar still can be used to provide potable water for the drinking purpose, but it has a daily yield of 3 litres/day. The experimental ... -
Design and experimental analysis of solar-powered water desalination system using humidification?dehumidification
( Taylor and Francis Ltd. , 2020 , Article)Desalination with solar-powered air heating and packed bed humidification is designed and fabricated using locally available materials. The system with fined type dehumidifier is designed using the LMTD method. There are ... -
Ground water treatment using solar radiation-vaporization & condensation-techniques by solar desalination system
( Taylor and Francis Ltd. , 2020 , Article)Solar Desalination unit with three basins system used for groundwater treatment. The incoming rate of water was measured in Solar based Distillation collected water during the morning to evening (8:00 am to 6:00 pm). In ... -
FEA based analysis and design of PMSM for electric vehicle applications using magnet software
( Taylor and Francis Ltd. , 2020 , Article)The automobile sector is one of the major consumers in India. Vehicles become the inevitable component in our day today life. It plays a vital role in peoples comfort. This growth of vehicles results in exponentially ... -
Enhancement of the distillate yield of solar still by separate and inbuilt condensers: A mini-Review
( Taylor and Francis Ltd. , 2020 , Article Review)Drinking water is considered one of the world's most important substances today. The amount of drinking water is also much lower. On the other hand, its use is immense both for the industry and for household duties. Solar ... -
Comparison of BPN, RBFN and wavelet neural network in induction motor modelling for speed estimation
( Taylor and Francis Ltd. , 2020 , Article)This paper discusses the question of estimating a neural network induction motor speed. The neural network is trained in the relationship between stator currents and rotor speed. Rotor currents and speed are created using ... -
Estimation of lubricity properties of nanolubricants
( Elsevier Ltd , 2020 , Conference)The lubricating performances liquid lubricants can be enhanced by homogeneously dispersing nanoparticles as an additive and it is estimated by mechanico-dynamical test. Four-ball wear test is a standard mechanico-dynamical ... -
Heterogeneous growth mechanism of ZnO nanostructures and the effects of their morphology on optical and photocatalytic properties
( Royal Society of Chemistry , 2017 , Article)Zinc oxide (ZnO) nanoflowers have huge potential for various applications. However, the growth mechanism of ZnO nanoflowers is still under debate despite various growth mechanisms having been proposed. The aim of this study ... -
Tribological behaviour of 1D and 2D nanofiller based high densitypoly-ethylene hybrid nanocomposites: A run-in and steady state phase analysis
( Elsevier Ltd , 2017 , Article)Hybrid nanocomposites are a class of materials with exceptional properties due to the synergizing effect of individual fillers. Current work reports the tribological behaviour of high densitypolyethylene-(HDPE) reinforced ... -
Studies on the Mechanical, Morphological and Electrical Properties of Highly Dispersible Graphene Oxide Reinforced Polypyrrole and Polyvinylalcohol Blend Composites
( Elsevier Ltd , 2018 , Conference)In the present study, water soluble polypyrrole (WPPy)/polyvinyl alcohol (PVA)/graphene oxide (GO) composite films were prepared via colloidal blending method at different GO loadings varying from 0 – 3 wt%. The dispersion ... -
Flexible ultra-sensitive and resistive NO2 gas sensor based on nanostructured Zn(X)Fe(1- x)2O4
( Royal Society of Chemistry , 2018 , Article)Low concentration gas detection, rapid response time and low working temperature are anticipated for a varied range of toxic gas detection applications. Conversely, the existing gas sensors suffer mostly from a high working ... -
Dielectric Spectroscopy
( Elsevier , 2017 , Book chapter)In this chapter, an attempt has been made to review dielectric spectroscopy (DS) as a technique for the characterization of nanomaterials. DS involves the study of the response of a material to an electric field, which ... -
Tribological studies of nanomodified mineral based multi-grade engine oil
( Research India Publications , 2017 , Article)This research study investigates the tribological behaviour of mineral based multi grade engine oil reinforced with nanoadditives using a pin on disc tribometer under different frictional conditions. Load, sliding speed, ... -
Introduction of Biopolymer Composites: What to do in Electronics?
( Elsevier Inc. , 2017 , Book chapter)Environment friendly, biodegradable and nontoxic materials especially from renewable resources are attaining great levels of attention nowadays. Biopolymers contribute a very significant division of materials through which ... -
Review of strategies toward the development of alloy two-dimensional (2D) transition metal dichalcogenides
( Elsevier Inc. , 2021 , Article Review)Atomically thin two-dimensional (2D) transition metal dichalcogenides (TMDCs) have attracted significant attention owing to their prosperity in material research. The inimitable features of TMDCs triggered the emerging ... -
Productivity forecasting of solar distiller integrated with evacuated tubes and external condenser using artificial intelligence model and moth-flame optimizer
( Elsevier Ltd , 2021 , Article)This paper aims at developing an artificial intelligence model to forecast the water yield of a modified solar distiller integrated with evacuated tubes and an external condenser. The model consists of a hybrid long ... -
An extensive analysis of mechanical, thermal and physical properties of jute fiber composites with different fiber orientations
( Elsevier Ltd , 2021 , Article)The study is aimed to find the effect of orientation of the woven jute fiber on the composites with epoxy matrix on the mechanical properties, thermal properties with different orientations (0°, 15°, 30°, 45°, 60° & 75°) ... -
Development and Fabrication of Carbon Nanotube (CNT)/CuO Nanocomposite for Volatile Organic Compounds (VOCs) Gas Sensor Application
( John Wiley and Sons Inc , 2021 , Article)Volatile organic compounds (VOCs) have been recognized as one of the primary trace segments of atmospheric air pollutants. The change in the level of VOCs in the surrounding environment can lead to chronic health issues, ...
