عرض بسيط للتسجيلة

المؤلفSayed, Aya
المؤلفAlhomsi, Yahya
المؤلفAlsalemi, Abdullah
المؤلفBensaali, Faycal
المؤلفMeskin, Nader
المؤلفHssain, Ali Ait
تاريخ الإتاحة2022-12-29T07:34:46Z
تاريخ النشر2022
اسم المنشورArtificial Organs
المصدرScopus
معرّف المصادر الموحدhttp://dx.doi.org/10.1111/aor.14318
معرّف المصادر الموحدhttp://hdl.handle.net/10576/37851
الملخصBackground: Training is an essential aspect of providing high-quality treatment and ensuring patient safety in any medical practice. Because extracorporeal membrane oxygenation (ECMO) is a complicated operation with various elements, variables, and irregular situations, doctors must be experienced and knowledgeable about all conventional protocols and emergency procedures. The conventional simulation approach has a number of limitations. The approach is intrinsically costly since it relies on disposable medical equipment (i.e., oxygenators, heat exchangers, and pumps) that must be replaced regularly due to the damage caused by the liquid used to simulate blood. The oxygenator, which oxygenates the blood through a tailored membrane in ECMO, acts as a replacement for the patient's natural lung. For the context of simulation-based training (SBT) oxygenators are often expensive and cannot be recycled owing to contamination issues. Methods: Consequently, it is advised that the training process include a simulated version of oxygenators to optimize reusability and decrease training expenses. Toward this goal, this article demonstrates a mock oxygenator for ECMO SBT, designed to precisely replicate the real machine structure and operation. Results: The initial model was reproduced using 3D modeling and printing. Additionally, the mock oxygenator could mimic frequent events such as pump noise and clotting. Furthermore, the oxygenator is integrated with the modular ECMO simulator using cloud-based communication technology that goes in hand with the internet of things technology to provide remote control via an instructor tablet application. Conclusions: The final 3D modeled oxygenator body was tested and integrated with the other simulation modules at Hamad Medical Corporation with several participants to evaluate the effectiveness of the training session. 2022 The Authors. Artificial Organs published by International Center for Artificial Organ and Transplantation (ICAOT) and Wiley Periodicals LLC.
راعي المشروعThis article was supported by the Qatar University Internal Grant No. M-CTP-CENG-2020-1. The findings achieved herein are solely the responsibility of the authors. Open Access funding provided by the Qatar National Library.
اللغةen
الناشرJohn Wiley and Sons Inc
الموضوعblood oxygenation
blood simulation
extracorporeal membrane oxygenation
high-realism simulation
mock oxygenator
simulation-based training
thermochromic ink
العنوانIoT-based mock oxygenator for extracorporeal membrane oxygenation simulator
النوعArticle
الصفحات2135-2146
رقم العدد11
رقم المجلد46


الملفات في هذه التسجيلة

الملفاتالحجمالصيغةالعرض

لا توجد ملفات لها صلة بهذه التسجيلة.

هذه التسجيلة تظهر في المجموعات التالية

عرض بسيط للتسجيلة