Novel electroless deposited corrosion — resistant and anti-bacterial NiP–TiNi nanocomposite coatings
View/ Open
Publisher version (Check access options)
Check access options
Date
2019Author
Fayyad E.M.Hassan M.K.
Rasool K.
Mahmoud K.A.
Mohamed A.M.A.
Jarjoura G.
Farhat Z.
Abdullah A.M.
...show more authors ...show less authors
Metadata
Show full item recordAbstract
From acidic NiP electroless bath, the co-deposition of TiNi nanoparticles in the NiP matrix to form novel NiP-TiNi nanocomposite coatings (NCCs) on top of API X100 carbon steel using several concentrations of TiNi nanoparticles (0.2, 0.4 and 0.8 g L−1 in the bath) is successfully achieved. The influence of the TiNi nanoparticles on the composition, deposition rate, thickness, and morphology of the NiP coating are investigated before and after annealing at 400 °C. The addition of TiNi nanoparticles into the NiP matrix leads to the transformation of the amorphous structure of the as-plated NiP into a semi-crystalline one. The microhardness of the composite coating significantly enhances with increasing the TiNi concentration up to 0.4 g L−1 and further improvement takes place after the heat treatment. The electrochemical impedance spectroscopy (EIS) and the colony counting method are carried out to assess the corrosion protection and antibacterial properties, respectively, of the as-deposited and the annealed coatings. The results demonstrate that there is an optimum concentration for the addition of TiNi (0.4 g L−1), which offers the composite coating with the highest corrosion protection (reaches to about 98%). Below and above this concentration as well as after the heat treatment, the improvement in the corrosion protection of the composite coatings slightly decreases. Besides, the NiP–TiNi NCCs have effective antibacterial properties as the cell viability of Escherichia coli decreases from 100 to 19%.
Collections
- Center for Advanced Materials Research [1351 items ]