TitleAuthorPublication DatePublisherType
    A model for predicting failure of oil pipelines  Senouci, Ahmed; Elabbasy, Mohamed; Elwakil, Emad; Abdrabou, Bassem; Zayed, Tarek2014Taylor & FrancisArticle
    Analysis of Pedestrian Crossing Speeds at Signalized Intersections in Qatar  Shaaban, Khaled2018Springer Berlin HeidelbergArticle
    Assessing the impact of converting roundabouts to traffic signals on vehicle emissions along an urban arterial corridor in Qatar.  Shaaban, Khaled; Abou-Senna, Hatem; Elnashar, Dina Mohamed; Radwan, Essam2018Taylor & FrancisArticle
    Blind identification of the Millikan Library from earthquake data considering soil-structure interaction  Ghahari, S. F.; Abazarsa, F.; Avci, O.; Çelebi, Mehmet; Taciroglu, E.2015John Wiley & Sons, Ltd.Article
    Characteristics of olive mill solid residue and its application in remediation of Pb2+, Cu2+ and Ni2+ from aqueous solution: Mechanistic study  Hawari, A.; Khraisheh, M.; Al-Ghouti, M.A.2014ElsevierArticle
    Classification tree analysis of factors affecting parking choices in Qatar  Shaaban, Khaled; Pande, Anurag2015Elsevier LtdArticle
    Combined influence of temperature and flow rate of feeds on the performance of forward osmosis  Hawari, Alaa H.; Kamal, Nagla; Altaee, Ali2016ElsevierArticle
    Condition prediction models for oil and gas pipelines using regression analysis  El-Abbasy, M.; Senouci, A.; Zayed, T.; Mirahadi, F.; Parvizsedghy, L.2014American Society of Civil Engineers (ASCE)Article
    Cost optimization of composite beams using genetic algorithms  Senouci, Ahmed B.; Al-Ansari, Mohammed S.2009Elsevier LtdArticle
    Critical factors determining bid/no bid decisions of contractors in Qatar  Jarkas, A.M.; Mubarak, Saleh; Kadri, C.Y2014American Society of Civil Engineers (ASCE)Article
    Drift optimization of high-rise buildings in earthquake zones  Al-Ansari, Mohammed; Senouci, Ahmed2011John Wiley & Sons, Ltd.Article
    The Effect of Aluminium Dross on Mechanical and Corrosion Properties of Concrete  Ozerkan, Nesibe; Maki, Omar; Anayeh, Momen; Tangen, Stian; M. Abdullah, Aboubakr2014OMICS InternationalArticle
    Effect of using Cement Kiln Dust as a nano-material on the strength of cement mortars  Alnahhal, Wael; Taha, Ramzi; Al-Nasseri, Hammad; Nishad, Safna2017Springer VerlagArticle
    Estimating the elastic settlement of vertically loaded single piles in rock  Eid, Hisham T.; Shehada, Abdalfatah A.2014Trans Tech PublicationsArticle
    Estimating Turning Movements at Signalized Intersections Using Artificial Neural Networks  Ghanim, Mohammad Shareef; Shaaban, Khaled2018Institute of Electrical and Electronics Engineers (IEEE)Article
    Evaluation of Combined Excavation Waste and Reclaimed Asphalt Pavement Aggregates for Use in Road Bases and Sub-bases  Taha, Ramzi; Sirin, Okan; Sadek, Husam2014OMICS InternationalArticle
    Evidential Reasoning–Based Condition Assessment Model for Offshore Gas Pipelines  Mosleh, Fadi; Zayed, Tarek; El-Abbasy, Mohammed S.2016American Society of Civil Engineers (ASCE)Article
    Experimental investigation of the influence of grain geometry on residual NAPL using synchrotron microtomography  Al-Raoush, Riyadh I.2014Elsevier B.V.Article
    Flexural and interfacial behavior of externally bonded/ mechanically fastened fiber-reinforced polymer-strengthened reinforced concrete beams  Ebead, Usama; Saeed, Huda2014American Concrete InstituteArticle
    Generalized spatial aliasing solution for the dispersion analysis of infinitely periodic multilayered composites using the finite element method  Haque, A. B.M.Tahidul; Ghachi, Ratiba F.; Alnahhal, Wael I.; Aref, Amjad; Shim, Jongmin2017American Society of Mechanical EngineersArticle