Browsing Center for Advanced Materials Research by Title
Now showing items 656-675 of 1321
-
Industrial wastewater treatment by electrocoagulation powered by a solar photovoltaic system
( Bellwether Publishing, Ltd. , 2021 , Article)Textile wastewater is hazardous to the environment due to their high pollution and toxicity. Some non-biodegradable compounds have a significant impact on BOD and COD levels in wastewater bodies. Dyes extracted from ... -
Industrial wastewater volume reduction through osmotic concentration: Membrane module selection and process modeling
( Elsevier Ltd , 2021 , Article)Osmotic concentration (OC), a form of forward osmosis (FO) but without draw solution recovery, can be applied for reducing wastewater disposal volumes in the oil & gas industry. Within this industry, wastewater is often ... -
Influence of accelerated weathering on the physical and structural properties of poly(Lactic-acid)/ poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (pla/phbv) blends
( BME-PT and GTE , 2021 , Article)The paper aims to study the poly(lactic acid) (PLA) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) blend properties after their degradation under 2000 h of accelerated weathering conditions following the ASTM D4329 ... -
Influence of additives on recycled polymer blends
( Springer Nature , 2013 , Article)Polymer systems based on polymer waste offer promising way to increase recycling in the society. Since fillers play a major role in determining the properties and behavior of polymer composites, recycled polymers can also ... -
Influence of BaTiO 3 /white graphene filler synergy on the energy harvesting performance of a piezoelectric polymer nanocomposite
( Royal Society of Chemistry , 2019 , Article)In this work, a novel ternary polyvinylidene fluoride hexafluoropropylene (PVDF-HFP) nanocomposite containing ceramic barium titanate nanoparticles (BaTiO 3 ) and hexagonal boron nitride (h-BN) nanolayers is developed. An ... -
Influence of blending and blend morphology on the thermal properties and crystallization behaviour of PLA and PCL in PLA/PCL blends
( Springer , 2016 , Article)In this paper, we reported on the influence of PCL on the cold crystallization behaviour of PLA in different PLA/PCL blends, and on the influence of blending with PLA on the PCL crystallization behaviour and kinetics. The ... -
Influence of carbon nanotubes on phase composition, thermal and post-heating behavior of cementitious composites
( Multidisciplinary Digital Publishing Institute (MDPI) , 2021 , Article)This paper experimentally investigates the influence of carbon nanotubes (CNTs) on phase composition, microstructure deterioration, thermal behavior, and residual mechanical strengths of cementitious composites exposed to ... -
Influence of combined natural deep eutectic solvent and polyacrylamide on the flocculation and rheological behaviors of bentonite dispersion
( Elsevier , 2022 , Article)The influence of hybrid coagulation/ flocculation systems on the degree of flocculation and rheological behavior of highly stable bentonite suspension has been investigated throughout this study. Natural deep eutectic ... -
Influence of CuO nanoparticles and graphene nanoplatelets on the sensing behaviour of poly(vinyl alcohol) nanocomposites for the detection of ethanol and propanol vapors
( Springer New York LLC , 2018 , Article)Poly(vinyl alcohol)/copper oxide/graphene nanoplatelets (PVA/CuO/Gr-NPls) nanocomposite based chemiresistive alcohol sensors were fabricated using colloidal blending method. The PVA/CuO/Gr-NPls nanocomposite films were ... -
Influence of graphene oxide on mechanical, morphological, barrier, and electrical properties of polymer membranes
( Elsevier , 2016 , Article Review)This paper expresses a short review of research on the effects of graphene oxide (GO) as a nanocomposite element on polymer morphology and resulting property modifications including mechanical, barrier, and electrical ... -
Influence of graphene wrapped-cerium oxide coating on spherical LiNi0.5Mn1.5O4 particles as cathode in high-voltage lithium-ion batteries
( Elsevier Ltd , 2022 , Article)Cobalt-free LiNi0.5Mn1.5O4 (Lithium Nickel Manganese Oxide; LNMO) has garnered considerable interest as a cathode material due to its high working voltage, lower cost, and environmental friendliness. However, LNMO cathodes ... -
Influence of lean premixed ratio of PCCI-DI engine fueled by diesel/biodiesel blends on combustion, performance, and emission attributes; a comparison study
( Elsevier Ltd , 2021 , Article)The traditional combustion mode which utilized in the DI diesel engine has high and excessive emissions so the most wanted combustion is creating new modes which produce low combustion temperatures and low emissions. The ... -
The influence of paraffin wax addition on the isothermal crystallization of LLDPE
( Wiley , 2016 , Article)The influence of paraffin wax addition on the isothermal crystallization kinetics of linear low density polyethylene (LLDPE) was studied in a temperature range where the wax was always in the molten state and could be ... -
Influence of pH on chloride binding isotherms for cement paste and its components
( Elsevier , 2021 , Article)In this paper, chloride (Cl−) binding isotherms are developed for cement hydration compounds, specifically, calcium-silicate-hydrates (CSH) and AFm phases including mono-sulfate aluminate, hydroxy-AFm, monocarbonate-AFm, ... -
Influence of polyolefin modified by Y2O3 as protective coatings against carbon steel corrosion into 3.5% NaCl media
( Springer , 2023 , Article)In this research work, we have studied the impact of Yttrium nanoparticles loaded with corrosion inhibitors dodecylamine (DOC) incorporated in polyolefin for the corrosion protection of steel. The surface analysis of pure ... -
Influence of relative humidity on the electrical response of PEDOT:PSS based organic field-effect transistor
( Elsevier B.V. , 2018 , Article)We have investigated the influence of relative humidity on the electrical response of a bottom gate organic field-effect transistor (OFET) with poly(3,4-ethylenedioxythiophene)/poly(4-styrene sulfonate) (PEDOT:PSS) as an ... -
Influence of surface modification of carbon nanotubes on interactions with polystyrene-b-polyisoprene-b-polystyrene matrix and its photo-actuation properties
( John Wiley & Sons, Ltd. , 2014 , Article)The influence of various surface modification of multiwalled carbon nanotubes (MWCNT) on preferential interactions with individual phases of the linear triblock copolymer polystyrene-b-polyisoprene-b-polystyrene (SIS) and ... -
Influence of temperature on the confinement effects of micro and nano level graphite filled poly(isoprene-co-isobutylene) composites
( Springer Netherlands , 2016 , Article)Electrically conducting elastomer composites using nanocarbon fillers have utmost significance in the current scenario of flexible electronics. Though a large number of reports have come out in this topic, the influence ... -
Influence of the Ce :YAG amount on structure and optical properties of Ce :YAG-PMMA composites for white LED
( De Gruyter , 2016 , Article)Ce:YAG-poly(methyl methacrylate) (PMMA) composites were prepared by using a melt compounding method, adding several amounts of Ce:YAG in the range 0.1–5wt.%. The optical properties of the obtained composites and of the ... -
Influence of the presence of medium-soft paraffin wax on the morphology and properties of iPP/silver nanocomposites
( Budapest University of Technology , 2015 , Article)The aim of this study was to investigate the presence of wax, different Ag nanoparticle contents, and different cooling rates from the melt, on the morphology, thermal and electrical conductivity, and dynamic mechanical ...