Browsing Center for Advanced Materials Research by Title
Now showing items 689-708 of 1347
-
Initiation and inhibition of pitting corrosion on reinforcing steel under natural corrosion conditions
( Elsevier Ltd , 2017 , Article)Initiation and inhibition of pitting corrosion on reinforcing steel in saturated, naturally aerated Ca(OH)2 solutions, under natural corrosion conditions, are followed through measurements of corrosion current, electrochemical ... -
Inorganic Porous Materials Based Epoxy Self-Healing Coatings
( Hamad bin Khalifa University Press (HBKU Press) , 2016 , Conference Paper)The long-term stability of protective coating for metal is critically important for structural applications [1, 2]. Self-healing ability extend the service life of protective coatings leading to a significant reduction in ... -
Insights into the influence of Pd loading on CeO2 catalysts for CO2 hydrogenation to methanol
( Elsevier , 2023 , Article)One of the most significant industrial processes is the catalytic methanol synthesis from carbon dioxide because methanol is a future energy carrier for producing fuels and high-value-added commodities, the so-called ... -
Instability in CH3NH3PbI3 perovskite solar cells due to elemental migration and chemical composition changes
( Nature Publishing Group , 2017 , Article)Organic-inorganic halide perovskites have rapidly grown as favorable materials for photovoltaic applications, but accomplishing long-term stability is still a major research problem. This work demonstrates a new insight ... -
Integrated capacitive and resistive humidity transduction via surface type nickel phthalocyanine based sensor
( Electrochemical Science Group , 2017 , Article)This paper reports the study of an organic semiconductor nickel phthalocyanine (NiPc) based thin film surface-type integrated capacitive and resistive type humidity sensor. The capacitance and resistance of the fabricated ... -
Integrated photoelectrochemical (PEC)-forward osmosis (FO) system for hydrogen production and fertigation application
( Elsevier Ltd , 2023 , Article)This study proposes an integrated system that combines a photoelectrochemical (PEC) system and forward osmosis (FO) system in tandem operation to address water, energy, and food (WEF) scarcity. The system utilizes a ... -
Integrating of electrocoagulation process with submerged membrane bioreactor for wastewater treatment under low voltage gradients
( Elsevier , 2023 , Article)Treating and reusing wastewater has become an essential aspect of water management worldwide. However, the increase in emerging pollutants such as polycyclic aromatic hydrocarbons (PAHs), which are presented in wastewater ... -
Integration of the inexpensive CuNWs based transparent counter electrode with dye sensitized photo sensors
( Royal Society of Chemistry , 2016 , Article)We demonstrate, a newly developed, inexpensive transparent conducting electrode (TCE) based on copper nanowires (CuNWs) combined with reduced graphene oxide (rGO) and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate ... -
Interface modification of compatibilized polyethylene terephthalate/polypropylene blends: Effect of compatibilization on thermomechanical properties and thermal stability
( WILEY-VCH Verlag , 2015 , Article)Polyethylene terephthalate (PET) and polypropylene (PP) are incompatible thermoplastics because of differences in chemical structure and polarity, hence their blends possess inferior mechanical and thermal properties. ... -
Interfaces study of all-polysaccharide composite films
( Springer International Publishing , 2018 , Article)Films made of xylan (X) and quaternized chitosan (QC) were prepared and the interactions of the polysaccharides on interfaces were discussed. According to elemental analysis, the X film contained also cellulose (31%) which ... -
Interfacial Electronic Interactions within the Pd-CeO2/Carbon Onions Define the Efficient Electrocatalytic Ethanol Oxidation Reaction in Alkaline Electrolytes
( American Chemical Society (ACS) , 2024 , Article)Porous Pd-based electrocatalysts are promising materials for alkaline direct ethanol fuel cells (ADEFCs) and ethanol sensors in the development of renewable energy and point-of-contact ethanol sensor test kits for drunk ... -
Interfacial Engineering of Porous Pd/M (M = Au, Cu, Mn) Sponge-like Nanocrystals with a Clean Surface for Enhanced Alkaline Electrochemical Oxidation of Ethanol
( American Chemical Society (ACS) , 2023 , Article)The interfacial engineering of Pd-based alloys (i.e., PdM with distinct morphologies, compositions, and strain defects) is an efficient way for enhanced catalytic activity; however, it remains a grand challenge to fabricate ... -
Interfacial Phenomenon and Nanostructural Enhancements in Palladium Loaded Lanthanum Hydroxide Nanorods for Heterogeneous Catalytic Applications
( Nature Publishing Group , 2018 , Article)Hydrogenation and cross-coupling reactions are of great importance for industrial applications and noble metal based catalysts are filling the void since the last few decades. However, the high cost of noble metals and ... -
Introduction of Biopolymer Composites: What to do in Electronics?
( Elsevier Inc. , 2017 , Book chapter)Environment friendly, biodegradable and nontoxic materials especially from renewable resources are attaining great levels of attention nowadays. Biopolymers contribute a very significant division of materials through which ... -
Investigating the potential of using solid waste generated from stone cutting factories for phenol removal from wastewater: A study of adsorption kinetics and isotherms
( Elsevier , 2023 , Article)Remarkably toxic, phenol requires efficient elimination from water. This study investigates the utilization of solid waste generated by stone-cutting factories for extracting phenol from wastewater. The solid waste underwent ... -
Investigation and performance analysis of Scheffler reflector solar cooking system integrated with sensible and latent heat storage materials
( Taylor and Francis Ltd. , 2020 , Article)In this present research work, Scheffler reflector is taken to supply heat to specially designed cooker having sensible and latent heat storage materials. Here, three different types of sensible heat storage materials like ... -
Investigation and performance analysis of solar still with energy storage materials: An energy- exergy efficiency analysis
( Elsevier Ltd , 2022 , Article)Researchers have attempted different Energy storage materials (ESM) in solar stills (SS) to improve distillate yield. In this experimental work, an attempt was made to increase the distillate yield & efficiency of SS, using ... -
Investigation and performance analysis of water-diesel emulsion for improvement of performance and emission characteristics of partially premixed charge compression ignition (PPCCI) diesel engines
( Elsevier Ltd , 2019 , Article)Partially premixed charge compression ignition (PPCCI) engine is a promising technique as compared with the conventional diesel engine. The present research paper shows the use of water-diesel emulsion at varying concentrations ... -
Investigation into mechanical, surface and adhesive properties of date palm wood-polyolefin micro composites
( Technical University in Zvolen , 2020 , Article)Wood-plastic composites are composite materials made of wood fibre or other lignocellulosic materials and thermoplastic(s). Date palms are one of the potential replacements of insufficient timber sources in the Middle ... -
Investigation of antimicrobial properties and in-vitro bioactivity of Ce3+-Sr2+dual-substituted nano hydroxyapatites
( Blackwell Publishing Inc. , 2019 , Article)Dual doped calcium apatite has been widely focused as it enhances the osteoconductive property for the possible applications in orthopedic and dental implants. In this work, we investigate the antimicrobial and bioactive ...