Browsing Center for Advanced Materials Research by Title
Now showing items 791-810 of 1333
-
Molecular and Structural Changes in Induced-Brain Stroke Tissue Using FTIR Imaging Spectroscopy, Scanning Electron and Atomic Force Microscopy
( Hamad bin Khalifa University Press (HBKU Press) , 2016 , Conference Paper)1. Background: Stroke, i.e. loss of brain function(s) due to disturbance in the blood supply to the brain, is the main cause of adult disability (e.g. paralysis) in the world, leaving more than half of the patients dependent ... -
Molecular scale cure rate dependence of thermoset matrix polymers
( Elsevier B.V. , 2016 , Article)This manuscript demonstrates the molecular scale cure rate dependence of di-functional epoxide based thermoset polymers cured with amines. A series of cure heating ramp rates were used to determine the influence of ramp ... -
Monitoring of under deposit corrosion for the oil and gas industry: A review
(2021 , Article Review)Internal corrosion due to under deposit corrosion (UDC) is responsible for at least 20% of incidents in the oil and gas industry. As a result, over the past decade, UDC has received much attention from researchers, corrosion ... -
Monolayer polymer photocells. The opportunities
( Academy of Sciences and Arts of the Republic of Serbia , 2015 , Article)The conversion of solar energy into electricity is in the focus of a large number of scientists. Because of the problems caused by the use of fossil fuels, the use of renewable and environmentally friendly energy sources ... -
Morphology analysis
( Elsevier , 2020 , Book chapter)This chapter is dedicated to the surface morphology and topography analyses of various types of polymers in terms of their structural conformations and resulting material structures. The morphology of polymers includes ... -
Morphology and magnetic properties of the ethylene-co-vinyl acetate/iron nanocomposite films prepared by implantation with Fe6+ ions
( Elsevier , 2016 , Article)Ethylene-co-vinyl acetate/iron nanocomposite films were fabricated by implantation with multiplecharged ions at different fluencies. The films obtained with ion fluency of 1 × 1017cm−2were used forspecific studies. It was ... -
Morphology and properties of poly(methyl methacrylate) (PMMA) filled with mesoporous silica (MCM-41) prepared by melt compounding
( Springer , 2016 , Article)This paper reports on the morphologies of poly(methyl methacrylate) (PMMA)/mesoporous silica (MCM-41) composites prepared by melt compounding with various MCM-41 contents in the range of 0.1–5 wt%, the interactions between ... -
Morphology and properties of the PP/LDPE/wood powder and the MAPP/LDPE/wood powder polymer blend composites.
( SAGE Publications , 2017 , Article)The properties of polypropylene/low-density polyethylene and maleic anhydride grafted polypropylene/low-density polyethylene blends, and their wood powder composites are compared in this study. The blends contained equal ... -
Morphology and thermal degradation studies of melt-mixed PLA/PHBV biodegradable polymer blend nanocomposites with TiO2 as filler
( Wiley Periodicals, Inc. , 2015 , Article)The morphology and thermal stability of melt-mixed poly(lactic acid) (PLA)/poly(hydroxybutyrate-co-valerate) (PHBV) blends and nanocomposites with small amounts of TiO2 nanoparticles were investigated. PLA/PHBV at 50/50 ... -
Morphology and thermal degradation studies of melt-mixed PLA/PHBV biodegradable polymer blend nanocomposites with TiO2 as filler.
( Wiley , 2015 , Article)The morphology and thermal stability of melt-mixed poly(lactic acid) (PLA)/poly(hydroxybutyrate-co-valerate) (PHBV) blends and nanocomposites with small amounts of TiO2 nanoparticles were investigated. PLA/PHBV at 50/50 ... -
Morphology and thermal degradation studies of melt-mixed poly(hydroxybutyrate-co-valerate) (PHBV)/poly(ε-caprolactone) (PCL) biodegradable polymer blend nanocomposites with TiO2 as filler
( Springer , 2015 , Article)The morphology, thermal stability and thermal degradation kinetics of melt-mixed poly(hydroxybutyrateco-valerate) (PHBV)/poly(e-caprolactone) (PCL) blends filled with small amounts of titanium(IV)oxide (TiO2) nanoparticles ... -
Morphology and thermal degradation studies of melt-mixed poly(lactic acid) (PLA)/poly(ε-caprolactone) (PCL) biodegradable polymer blend nanocomposites with TiO2 as filler
( Elsevier , 2015 , Article)The morphology and thermal stability of melt-mixed poly(lactic acid) (PLA)/poly(ε-caprolactone) (PCL) blend nanocomposites with small amounts of TiO2 nanoparticles were investigated. The nanoparticles were mostly located ... -
Morphology of epoxy/rubber blends
( Springer International Publishing , 2017 , Book chapter)The investigations on the morphological features of epoxy/rubber blends are of great importance as the morphology controls the property and performance of these blends. The characterization techniques like optical microscopy ... -
Morphology, interfacial interaction, and thermal degradation of polycarbonate/MCM-41 (nano)composites
( Taylor & Francis , 2017 , Article)This article reports on the morphology, interfacial interaction, thermal stability, and thermal degradation kinetics of polycarbonate (PC)/mesoporous silica (MCM-41) composites with various MCM-41 contents, prepared by ... -
Morphology, nucleation, and isothermal crystallization kinetics of poly(butylene succinate) mixed with a polycarbonate/MWCNTs masterbatch
( MDPI , 2018 , Article)In this study, nanocomposites were prepared by melt blending poly(butylene succinate) (PBS) with a polycarbonate (PC)/multi-wall carbon nanotubes (MWCNTs) masterbatch, in a twin-screw extruder. The nanocomposites contained ... -
Morphology, Nucleation, and Isothermal Crystallization Kinetics of Poly(ε-caprolactone) Mixed with a Polycarbonate/MWCNTs Masterbatch
( MDPI AG , 2017 , Article)In this study, nanocomposites were prepared by melt blending poly (ε-caprolactone) (PCL) with a (polycarbonate (PC)/multi-wall carbon nanotubes (MWCNTs)) masterbatch in a twin-screw extruder. The nanocomposites contained ... -
Morphology, thermal and dynamic mechanical properties of poly(lactic acid)/expandable graphite (PLA/EG) flame retardant composites
( SAGE Publications Ltd , 2019 , Article)This work reports on the effect of expandable graphite (EG) on the morphology, thermal and dynamic mechanical properties of flame retardant poly(lactic acid) (PLA)/EG composites. The composites were prepared by melt-mixing ... -
Multi-component MWCNT/NG/EP-based bipolar plates with enhanced mechanical and electrical characteristics fabricated by compression moulding
( Elsevier Ltd , 2018 , Article)In this work, multi-walled carbon nanotubes (MWCNTs), natural graphite (NG) and epoxy (EP) were used to fabricate bipolar plates by the compression moulding technique. The mechanical and thermal behaviours of the as-developed ... -
Multi-functional wet-electrospun piezoelectric nanofibers sensing mat: Manufacturing, characterization, and applications
( Elsevier Ltd , 2023 , Article)This paper introduces the fabrication of multi-featured nanofibers membranes using wet-electrospinning process. Polyvinylidene fluoride (PVDF) nanofibers were wet-electrospun onto poly (3, 4-ethylenedioxythiophene) poly ... -
Multifunctional Oil Absorption with Macroporous Polystyrene Fibers Incorporating Silver-Doped ZnO
( American Chemical Society , 2021 , Article)Hydrophobic microporous polystyrene (PS) fibers are fabricated by a solvent-induced phase-separation-assisted electrospinning method. Zinc oxide (ZnO) and silver-doped zinc oxide (Ag-ZnO) nanomaterials with variable ...