Browsing Center for Advanced Materials Research by Title
Now showing items 609-628 of 1347
-
High-Precision Nonenzymatic Electrochemical Glucose Sensing Based on CNTs/CuO Nanocomposite
( Springer , 2022 , Article)The measurement of blood glucose levels is essential for diagnosing and managing diabetes. Enzymatic and nonenzymatic approaches using electrochemical biosensors are used to measure serum or plasma glucose accurately. ... -
Highly conductive phase change composites based on paraffin-infiltrated graphite panels for photo/electrothermal conversion and storage
( Elsevier , 2023 , Article)The extensive utilization of phase change materials (PCMs) for thermal energy harvesting, storage, and thermal management is often constrained by their inadequate thermal and electrical conductivity, form instability, and ... -
Highly efficient eco-friendly corrosion inhibitor for mild steel in 5 M HCl at elevated temperatures: experimental & molecular dynamics study
( Nature Publishing Group , 2019 , Article)Laurhydrazide N?-propan-3-one was used as an eco-friendly inhibitor for the corrosion of mild steel in 5 M HCl at elevated temperatures. Various electrochemical techniques and surface characterization methods were utilized ... -
Highly efficient methanol oxidation reaction on durable Co9S8 @N, S-doped CNT catalyst for methanol fuel cell applications
( Elsevier Ltd , 2022 , Article)The implementation of direct methanol fuel cells is seen as a reliable factor in the future energy mix. Efficient energy conversion from methanol requires an active and durable catalyst to drive the anodic methanol oxidation ... -
Highly efficient photocatalytic z-scheme hydrogen production over oxygen-deficient WO3-x nanorods supported Zn0.3Cd0.7S heterostructure
( Nature Publishing Group , 2017 , Article)The demand for clean renewable energy is increasing due to depleting fossil fuels and environmental concerns. Photocatalytic hydrogen production through water splitting is one such promising route to meet global energy ... -
Highly efficient sustainable photocatalytic Z-scheme hydrogen production from an α-Fe2O3 engineered ZnCdS heterostructure
( Elsevier , 2017 , Article)We present an α-Fe2O3/Zn0.4Cd0.6S heterostructure that shows visible light photocatalytic H2 production as high as 536.8μmolh−1 with apparent quantum efficiency of 11.2% at 420nm. The UV–vis diffuse reflectance spectra of ... -
Highly ordered mesoporous silica and halloysite nanotubes loaded with diethylenetriamine DETA for smart anti corrosion coatings
( Hamad bin Khalifa University Press (HBKU Press) , 2018 , Conference Paper)The development of nanoscience and technology has devoted significant attention to conducting studies on hollow particles. Among the available materials, mesoporous silica nanoparticles have recently gained attention as ... -
Highly ordered nanoporous carbon films with tunable pore diameters and their excellent sensing properties
( Wiley-VCH Verlag , 2015 , Article)Ordered porous carbon films with tunable pore diameters, immobilized with glucose oxidase (GOD) have been fabricated and employed for the construction of a biosensor for glucose molecules. The as-prepared porous films have ... -
Highly porous PtPd nanoclusters synthesized via selective chemical etching as efficient catalyst for ethanol electro-oxidation
( Elsevier , 2020 , Article)Direct ethanol fuel cells (DEFCs) have received great interest owing to their high power density and environmental friendness. Nevertheless, the designing of active, durable, and efficient anode for DEFCs is a profound ... -
Highly protective polyolefin coating modified with ceria nano particles treated with N,N,N',N'-Tetrakis(2-hydroxyethyl)ethylenediamine for corrosion protection of carbon steel
( Elsevier Ltd , 2022 , Article)A polyolefin coating was modified with cerium oxide nanoparticles treated with N,N,N',N'-Tetrakis(2-hydroxyethyl)ethylenediamine (THEEDA) as corrosion inhibitor for corrosion protection of carbon steel. Electrochemical ... -
Highly selective gas sensors from photo-activated ZnO/PANI thin films synthesized by mSILAR
( Elsevier Ltd , 2017 , Article)Zinc oxide (ZnO) nano-polycrystalline thin films has been prepared by cost-effective microwave assisted successive ionic layer adsorption and reaction (mSILAR) technique. ZnO/PANI prepared by in situ polymerization technique ... -
Highly sensitive and selective colorimetric sensing of CO2 for biomedical applications
( Springer Science and Business Media Deutschland GmbH , 2022 , Article)The concentration of carbon dioxide (CO2) in unhealthy people differs greatly from healthy people. High-precision CO2 detection with a quick response time is essential for many biomedical applications. A major focus of ... -
Highly sensitive humidity sensor based on cadmium selenide quantum dots-polymer composites: synthesis, characterization, and effect of UV/ozone treatment
( Springer , 2023 , Article)This work describes the rational design of thin film-based cadmium selenide quantum dots (CdSe) mixed with conductive polyvinylidene fluoride (PVDF), inducing PVDF-CdSe composite for potential resistive humidity-sensing ... -
Highly stable Ti3C2Tx (MXene)/Pt nanoparticles-modified glassy carbon electrode for H2O2 and small molecules sensing applications
( Elsevier B.V. , 2018 , Article)© 2018 Elsevier B.V. Electrochemical performance of a 2D Ti3C2Tx (MXene, where T: [dbnd]O, –OH, –F) sheets modified with Pt nanoparticles (PtNPs) was investigated. The results showed that Ti3C2Tx/PtNP nanocomposite deposited ... -
Humidity sensor based on poly(lactic acid)/PANI-ZnO composite electrospun fibers
( Royal Society of Chemistry , 2021 , Article)The electrospinning technique has been successfully used to prepared micro-fibers of the poly(lactic acid)/polyaniline–zinc oxide (PLA/PANI–ZnO) composite. The polyaniline–zinc oxide (PANI–ZnO) nanocomposites are synthesized ... -
Hybrid effect of carbon nanotubes and polypropylene microfibers on fire resistance, thermal characteristics and microstructure of cementitious composites
( Elsevier , 2020 , Article)The current study experimentally investigates the hybrid effect of carbon nanotubes (CNTs) and polypropylene (PP) microfibers on fire resistance and thermal characteristics of cementitious composites. Cement mortar with ... -
Hybrid Halloysite Nanotubes as Smart Carriers for Corrosion Protection
( American Chemical Society , 2020 , Article)Novel hybrid halloysite nanotubes (HHNTs) were developed and used as smart carriers for corrosion protection of steel. For this purpose, as-received halloysite nanotubes (HNTs) were loaded with a corrosion inhibitor, ... -
Hybrid shell microcapsules containing isophorone diisocyanate with high thermal and chemical stability for autonomous self-healing of epoxy coatings
( John Wiley and Sons Inc. , 2019 , Article)Silica-polyurea/polyuretane hybrid shell microcapsules (MCs) loaded with isophorone diisocyanate (IPDI) with long shelf-life and high thermal and chemical stability are prepared via emulsification followed by interfacial ... -
Hydrocarbon-based fuel cell membranes: Sulfonated crosslinked poly(1,3-cyclohexadiene) membranes for high temperature polymer electrolyte fuel cells
( Elsevier , 2015 , Article)High temperature fuel cell membranes based on poly(1,3-cyclohexadiene) were prepared by a Polymerization-Crosslinking-Sulfonation (PCS) approach, and a broad range of membrane compositions were achieved using various ... -
Identification of Molecular Fluorophore as a Component of Carbon Dots able to Induce Gelation in a Fluorescent Multivalent-Metal-Ion-Free Alginate Hydrogel
( Nature Publishing Group , 2019 , Article)We introduce a simple approach to fabricate fluorescent multivalent metal ion-free alginate hydrogels, which can be produced using carbon dots accessible from natural sources (citric acid and L-cysteine). Molecular fluorophore ...