Search
Now showing items 31-40 of 777
Investigation of the physico-mechanical properties of electrospun PVDF/cellulose nanofibers.
(
Wiley
, 2016 , Article)
The electro-activity and mechanical properties of PVDF depends mainly on the b-phase content and degree of crystallinity. In this study, cellulose fibers were used to improve these characteristics. This could be achieved ...
Preparation and characterisation of Ce:YAG -polycarbonate composites for white LED
(
Elsevier
, 2016 , Article)
Ce:YAG-polycarbonate composites were prepared with several amounts of Ce:YAG in the range 0.1–5 wt.% by using melt compounding. The structure and morphology of the composites were investigated by means of X-ray diffractometry ...
Direct electroreduction of indium and tin oxides in molten salts
(
Electrochemical Society Inc.
, 2014 , Article)
Indium is a rare metal. The largest end use for indium is in thinfilm coatings as indium oxide combined with 10 percent tin oxide (ITO). However, indium has recycling rates less than 1%. Indium and tin are especially well ...
Grain refining and improving mechanical properties of a warm rolled AZ31 alloy plate
(
Elsevier B.V.
, 2014 , Article)
The mechanical properties of an AZ31 magnesium alloy were improved after warm rolling. The study involved a pre-rolling condition in which the material consisted of twins, playing a key role in recrystallization grain ...
Electrically conductive composites based on an elastomeric matrix filled with expanded graphite as a potential oil sensing material
(
Institute of Physics Publishing
, 2014 , Article)
The preparation and properties of electrically conductive polymeric composites based on an elastomer matrix (styrene-isoprene styrene block copolymer) filled with expanded graphite are reported in this paper. The developed ...
Nickel oxide carbon nanofiber composite for electrochemical oxidation of methanol
(
Electrochemical Society Inc.
, 2014 , Conference Paper)
Electrospun fibers of a mixture of polyvinylpyrrolidone (PVP), polyaniline (PANI) and graphene were stabilized for 2 h at 200 °C and then carbonized at 800 °C for 5 h. Composites were prepared by depositing Ni(OH)2 on the ...
Deep drawability and drawing behaviour of AZ31 alloy sheets with different initial texture
(
Elsevier Ltd
, 2014 , Article)
Repeated unidirectional bending (RUB) process was carried out to improve the texture of AZ31 alloy sheets. Compared to the as-received sheet with a strong basal texture, the RUB processed sheet with a weaker basal texture ...
Microstructure evolution and mechanical properties of twinned AZ31 alloy plates at lower elevated temperature
(
Elsevier Ltd
, 2014 , Article)
The AZ31 alloy plates were pre-rolled at room temperature along the transverse direction to introduce extension twinning. The effect of pre-existing twins on the mechanical properties of AZ31 alloy plates at lower elevated ...
Quadrupolar benzobisthiazole-cored arylamines as highly efficient two-photon absorbing fluorophores
(
American Chemical Society
, 2014 , Article)
A computer-aided design of novel D-?-A-?-D styrylamines containing five isomeric benzobisthiazole moieties as the electron-accepting core has revealed the linear centrosymmetric benzo[1,2-d:4,5-d?]bisthiazole as the most ...
Improved mechanical properties of AZ31 magnesium alloy plates by pre-rolling followed by warm compression
(
Elsevier Ltd
, 2014 , Article)
AZ31 magnesium alloy plates were processed by pre-rolling followed by warm compression. The corresponding microstructure evolution and mechanical properties were investigated in the present paper. The pre-introduced twins ...