Center for Advanced Materials Research: Recent submissions
Now showing items 661-680 of 1481
-
Humidity sensor based on poly(lactic acid)/PANI-ZnO composite electrospun fibers
( Royal Society of Chemistry , 2021 , Article)The electrospinning technique has been successfully used to prepared micro-fibers of the poly(lactic acid)/polyaniline–zinc oxide (PLA/PANI–ZnO) composite. The polyaniline–zinc oxide (PANI–ZnO) nanocomposites are synthesized ... -
The recent advances in the mechanical properties of self-standing two-dimensional MXene-based nanostructures: Deep insights into the supercapacitor
( MDPI AG , 2020 , Article)MXenes have emerged as promising materials for various mechanical applications due to their outstanding physicochemical merits, multilayered structures, excellent strength, flexibility, and electrical conductivity. Despite ... -
Unveiling fabrication and environmental remediation of mxene-based nanoarchitectures in toxic metals removal from wastewater: Strategy and mechanism
( MDPI AG , 2020 , Article)Efficient approaches for toxic metal removal from wastewater have had transformative impacts to mitigating freshwater scarcity. Adsorption is among the most promising purification techniques due to its simplicity, low cost, ... -
Low-toxic, earth-abundant nanostructured materials for thermoelectric applications
( MDPI AG , 2021 , Article)This article presents recent research directions in the study of Earth-abundant, cost-effective, and low-toxic advanced nanostructured materials for thermoelectric generator (TEG) applications. This study’s critical aspect ... -
Effect of sulfonated poly (ether ether ketone) on the sensitivity of polyvinylidene fluoride-based resistive humidity sensors
( Elsevier Ltd , 2020 , Article)We have investigated the effect of sulfonated poly (ether ether ketone) (SPEEK) on the thermal stability, hydrophilicity, and sensitivity of polyvinylidene fluoride (PVDF) films based resistive humidity sensors. The blended ... -
A review of MXenes as emergent materials for dye removal from wastewater
( Elsevier B.V. , 2022 , Article)MXenes have emerged as a superlative contestant water purification technology due to their two-dimensional multilayered structures, multifarious chemical composition, photocatalytic properties, and activated metallic ... -
Highly ordered nanoporous carbon films with tunable pore diameters and their excellent sensing properties
( Wiley-VCH Verlag , 2015 , Article)Ordered porous carbon films with tunable pore diameters, immobilized with glucose oxidase (GOD) have been fabricated and employed for the construction of a biosensor for glucose molecules. The as-prepared porous films have ... -
Recent developments and advancements in graphene-based technologies for oil spill cleanup and oil-water separation processes
( MDPI , 2022 , Article)The vast demand for petroleum industry products led to the increased production of oily wastewaters and has led to many possible separation technologies. In addition to production-related oily wastewater, direct oil spills ... -
From Waste to Watts: Updates on Key Applications of Microbial Fuel Cells in Wastewater Treatment and Energy Production
( MDPI , 2022 , Article)Due to fossil fuel depletion and the rapid growth of industry, it is critical to develop environmentally friendly and long-term alternative energy technologies. Microbial fuel cells (MFCs) are a powerful platform for ... -
Ionic liquids application for wastewater treatment and biofuel production: A mini review
( Elsevier B.V. , 2021 , Article Review)Commonly described as ionic compounds that are fluid below 100 C, Ionic Liquids (ILs) have found its application in several fields of science and engineering. Formerly limited in its use for electrochemical purposes, ILs ... -
Key applications and potential limitations of ionic liquid membranes in the gas separation process of CO2, CH4, N2, H2 or mixtures of these gases from various gas streams
( MDPI AG , 2020 , Article Review)Heightened levels of carbon dioxide (CO2) and other greenhouse gases (GHGs) have prompted research into techniques for their capture and separation, including membrane separation, chemical looping, and cryogenic distillation. ... -
Thermochemical splitting of CO2 using solution combustion synthesized LaMO3 (where, M = Co, Fe, Mn, Ni, Al, Cr, Sr)
( Elsevier B.V. , 2020 , Article)The effort of this paper was to recognize the inclusion of appropriate dopants that will upgrade the redox reactivity of La-based perovskites. By maintaining the fuel (glycine) to metal nitrate ratio () = 1, the LaMO3 ... -
Photodegradation of Organic Pollutants Using an Efficient Molybdate Intercalated Mg2+/Fe3+ Layered Double Hydroxide (LDH)
( Hamad bin Khalifa University Press (HBKU Press) , 2016 , Conference)Organic pollutants dyes are the highly toxic major waste products causing severe harmful environmental pollution. From the viewpoint of environmental issues, the removal of harmful organic dye compounds is of great interest ... -
Low cost anode electrocatalyst for Direct Methanol Fuel Cell applications
( Hamad bin Khalifa University Press (HBKU Press) , 2018 , Conference)Direct methanol fuel cell has attracted worldwide attention as a promising alternative clean energy source due to growing environmental problems. A number of scientific groups are working to develop the fuel cells and make ... -
Effect of Trace 100 vppm H2S on the Corrosion Behaviour of Plain Carbon and Microalloyed Steels in a Predominant Sweet Environment in High Flow Regime
( Hamad bin Khalifa University Press (HBKU Press) , 2018 , Conference)We investigate the effects of the presence of trace (100 vppm) H2S on the corrosion behaviour of plain carbon steel and its various micro-alloyed counterparts in a CO2 saturated (sweet) brine (0.5 M NaCl) environment, in ... -
Effect of poly(ε-caprolactone) and titanium (IV) dioxide content on the UV and hydrolytic degradation of poly(lactic acid)/poly(ε-caprolactone) blends
( John Wiley and Sons Inc , 2021 , Article)The effect of accelerated weathering degradation on the properties of poly(lactic acid) (PLA)/poly(ε-caprolactone) (PCL) blends and PLA/PCL/titanium (IV) dioxide (TiO2) nanocomposites are presented in this paper. The results ... -
Development of value-added polyethylene grades with extended service lifetime: Weathering resistant flame retarded materials for outdoor applications
( John Wiley and Sons Inc , 2021 , Article)The current article deals with the development of different novel, tailor-made polyolefin formulations exhibiting both low flammability and high weathering resistance, so as to provide value-added polyethylene grades with ... -
Artificial weathering and accelerated heat aging studies on low-density polyethylene (Ldpe) produced via autoclave and tubular process technologies
( BME-PT and GTE , 2021 , Article)Accelerated (artificial) weathering and thermal aging tests were performed to investigate the effectiveness of different formulations in reducing the UV/heat degradation extent for two low-density polyethylene types (LDPE-A, ... -
Influence of accelerated weathering on the physical and structural properties of poly(Lactic-acid)/ poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (pla/phbv) blends
( BME-PT and GTE , 2021 , Article)The paper aims to study the poly(lactic acid) (PLA) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) blend properties after their degradation under 2000 h of accelerated weathering conditions following the ASTM D4329 ... -
Effect of plasma treatment on accelerated pla degradation
( BME-PT and GTE , 2021 , Article)Poly(lactic acid) (PLA) has been found to be important in various applications, such as in the medical, pharma-ceutical, and packaging industries. However, the long-term associated degradation process of PLA is a limiting ...
