Center for Advanced Materials: Recent submissions
Now showing items 581-600 of 1613
-
Green energy powered - vapor, thermal and UV light assisted disinfection technology
( Elsevier , 2023 , Article)Infectious diseases are responsible for an immense global burden of disease that impacts public health systems and economies worldwide. The rapid increase in the use of protective items has introduced an urge for their ... -
A comparative assessment on life cycle analysis of the biodiesel fuels produced from soybean, Jatropha, Calophyllum inophyllum, and microalgae
( Uppalapati, S., Jani, S. P., Khan, M. B. A., Alagarsamy, M., Manoharan, M., Panchal, H., & Sadasivuni, K. K. (2022). A comparative assessment on life cycle analysis of the biodiesel fuels produced from soybean, Jatropha, Calophyllum inophyllum, and microalgae. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 44(2), 3253-3272. , 2022 , Article)There is a continuous depletion of fossil resources recorded in 20th century for the production of diesel that resulted in significant climatic change. The current study focuses on the challenges faced due to energy crisis ... -
Synthesis and characterization of stir casted Cu-ZrO2-Graphite hybrid metal matrix composites for thermal management structures
( SAGE , 2022 , Article)The present study aims at investigating the properties of copper matrix-based hybrid metal matrix composites (MMCs) reinforced with ZrO2 and Graphite. The MMCs were prepared using stir casting technique. The composite ... -
Machine learning driven intelligent and self adaptive system for traffic management in smart cities
( Springer Nature , 2022 , Article)Traffic congestion is becoming a serious problem with the large number of vehicle on the roads. In the traditional traffic control system, the timing of the green light is adjusted regardless of the average traffic rate ... -
Picomolar or beyond Limit of Detection Using Molecularly Imprinted Polymer-Based Electrochemical Sensors: A Review
( Multidisciplinary Digital Publishing Institute (MDPI) , 2022 , Article)Over the last decades, molecularly imprinted polymers (MIPs) have emerged as selective synthetic receptors that have a selective binding site for specific analytes/target molecules. MIPs are synthetic analogues to the ... -
An extensive review of performance enhancement techniques for pyramid solar still for solar thermal applications
( Elsevier , 2022 , Article)Due to the rapid increase on world population, the demand for potable water is also getting increased. The solar distillation process is one among the prominent options, for those facing shortage of water in rural areas. ... -
Self-sanitizing reusable glove via 3D-printing and common mold making method
( Elsevier , 2023 , Article)In health care and public health practice, it is critical to settings control practices that are critical to reducing the transmission of infections through cross-contamination. To provide protection from cross-contamination, ... -
Design and development of novel computer vision-based automatic calibration system for analog dial pressure gauge
( American Society for Testing and Materials , 2022 , Article)Pressure gauge calibration refers to comparing the standard and test gauge to determine the error percentage. The reading accuracy of the analog dial pressure gauge is found in the conventional method through manual ... -
Sense and Learn: Recent Advances in Wearable Sensing and Machine Learning for Blood Glucose Monitoring and Trend-Detection
( Frontiers Media S.A. , 2022 , Article)(Figure presented.) Diabetes mellitus is characterized by elevated blood glucose levels, however patients with diabetes may also develop hypoglycemia due to treatment. There is an increasing demand for non-invasive blood ... -
Antibacterial Performance of Protonated Polyaniline-Integrated Polyester Fabrics
( Multidisciplinary Digital Publishing Institute (MDPI) , 2022 , Article)During the last few years, there has been an increase in public awareness of antimicrobial fabrics, as well as an increase in commercial opportunities for their use in pharmaceutical and medical settings. The present study ... -
An Improved Quality Inspection of Engine Bearings Using Machine Vision Systems
( American Society for Testing and Materials , 2022 , Article)The growth of an industry is mostly based on the quality of the product. When there is a fault in the manufactured product in a batch, the entire batch is rejected because of a single faulty product. Quality has become one ... -
Synthesis and mechanochromic investigations of new cyanopyridone derivatives
( Elsevier , 2023 , Article)In the present work, four new cyanopyridone derivatives bearing terminal long chain alkyloxy substituents were designed and synthesized. All the synthesized target compounds were characterized by IR, NMR and Mass spectrometry. ... -
Impact of alternate Mn doping in ternary nanocomposites on their structural, optical and antimicrobial properties: Comparative analysis of photocatalytic degradation and antibacterial activity
( Academic Press , 2023 , Article)The present study was done to investigate and compare the photocatalytic and antibacterial activity of two in situ Manganese doped ternary nanocomposites. The dual ternary hybrid systems comprised Mn-doped Ag2WO4 coupled ... -
Tailoring the deposition of MoSe2 on TiO2 nanorods arrays via radiofrequency magnetron sputtering for enhanced photoelectrochemical water splitting
( Elsevier , 2023 , Article)MoSe2/1 D TiO2 nanorods (NRs) heterojunction assembly was systematically fabricated, and its photoelectrocatalytic properties were investigated. The fabrication process involves the growth of 1D TiO2 NRs arrays on FTO ... -
Up-cycling plastic waste into swellable super-sorbents
( Elsevier , 2023 , Article)Environmental pollution caused by plastic waste and oil spills has emerged as a major concern in recent years. Consequently, there has been a growing interest in exploring innovative solutions to address these challenges. ... -
Phase change materials designed from Tetra Pak waste and paraffin wax as unique thermal energy storage systems
( Elsevier , 2023 , Article)Thermal energy storage systems (TES) based on shape-stabilized phase change materials (SSPCM) designed from recycled Tetra Pak (TP) waste, paraffin wax (PW), and expanded graphite (EG) were investigated in this study. This ... -
Recent advances on humic acid removal from wastewater using adsorption process
( Elsevier , 2023 , Article Review)Humic acid (HA) is a component of natural organic matter (NOM) with a high molecular weight and high complexity. The presence of humic acid in water raises serious concerns due to its toxicity and ability to form carcinogenic ... -
Highly conductive phase change composites based on paraffin-infiltrated graphite panels for photo/electrothermal conversion and storage
( Elsevier , 2023 , Article)The extensive utilization of phase change materials (PCMs) for thermal energy harvesting, storage, and thermal management is often constrained by their inadequate thermal and electrical conductivity, form instability, and ... -
A practical perspective for chromatic orthogonality for implementing in photolithography
( Nature Research , 2023 , Article)Theoretically, it is more challenging to anticipate the conversion and selectivity of a photochemical experiment compared to thermally generated reactivity. This is due to the interaction of light with a photoreactive ... -
Fiber Bragg Gratings based smart insole to measure plantar pressure and temperature
( Elsevier , 2023 , Article)Various foot complications can be easily avoided by continuously monitoring plantar (foot sole) pressure and temperature at home. Systems which can simultaneously measure plantar pressure and temperature in real time are ...
