Show simple item record

AuthorSusar, Mehmet Anll
AuthorYllmaz, Oǧuzhan
AuthorFathipour, Amirhossein
AuthorMutlu, Onur
AuthorMazhar, Noaman
AuthorEl-Menyar, Ayman
AuthorAl-Thani, Hassan
AuthorYalçln, Hüseyin Çaǧatay
AuthorYavuz, Mehmet Metin
Available date2025-10-12T06:43:51Z
Publication Date2025-11-01
Publication NameJournal of Biomechanical Engineering
Identifierhttp://dx.doi.org/10.1115/1.4069296
CitationSusar, M. A., Yılmaz, O., Fathipour, A., Mutlu, O., Mazhar, N., El-Menyar, A., Al-Thani, H., Yalçın, H. Ç., and Yavuz, M. M. (August 19, 2025). "Characterization of Flow Structure and Wall Shear Stress in Patient-Specific Abdominal Aortic Aneurysm Phantom Using Particle Image Velocimetry." ASME. J Biomech Eng. November 2025; 147(11): 111001. https://doi.org/10.1115/1.4069296
ISSN01480731
URIhttps://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=105013808501&origin=inward
URIhttp://hdl.handle.net/10576/67854
AbstractAbdominal aortic aneurysm (AAA) is an irreversible dilation of the abdominal aorta that carries a significant risk of rupture if not adequately screened and treated. This condition poses a severe threat, with a mortality rate exceeding 80% in certain age groups. The enlargement of the abdominal aorta leads to notable hemodynamic alterations in AAAs, characterized by flow separation and vortical structures. Current understanding acknowledges a correlation between the growth and rupture mechanisms of AAA and the disturbed hemodynamics, emphasizing metrics such as time-averaged wall shear stress (TAWSS), oscillatory shear index (OSI), endothelial cell activation potential (ECAP), and relative residence time (RRT). In this study, we utilized a quantitative velocity measurement technique, particle image velocimetry (PIV), to characterize the flow structure and wall shear stress in a patient-specific aneurysmal abdominal aorta phantom. AAA phantoms generated from patient computed tomography (CT) images were used. Phase-averaged flow fields for 12 phases of physiological flow were investigated, and velocity contours, streamline patterns, and swirling strength contours were constructed in the AAA at three different PIV planes. A method previously developed and validated to extract wall shear stress from PIV measurements is applied to obtain shear stress indexes, including TAWSS, OSI, ECAP, and RRT. In addition, to link our findings with the clinical rupture risk, actual rupture location in the CT images of the aneurysm sac for the studied case was compared with the flow structure and shear stress distributions obtained from PIV measurements. The progression of vortex structures in the bulge along with the flow separation and reattachment zones in relation to the shear stress indexes are presented and discussed in detail. When flow dynamics in actual rupture location is analyzed, there is a high level of flow disturbance characterized by flow circulation, low TAWSS, and high OSI, ECAP, and RRT, consistent with previous studies. Here, we present a PIV-based flow examination through patient-specific phantom, which will contribute to experimental investigations for understanding the influence of disturbed hemodynamics on AAA biomechanics.
SponsorThis research work was made possible by Qatar University International Research Collaboration Co-fund program IRCC 2020 002 (Funder ID: 10.13039/501100004252).
Languageen
PublisherAmerican Society of Mechanical Engineers (ASME)
Subjectabdominal aortic aneurysm
disturbed hemodynamics
ECAP
OSI
particle image velocimetry (PIV)
patient-specific model
RRT
shear stress indexes
swirling strength
TAWSS
wall shear stress (WSS)
TitleCharacterization of Flow Structure and Wall Shear Stress in Patient-Specific Abdominal Aortic Aneurysm Phantom Using Particle Image Velocimetry
TypeArticle
Issue Number11
Volume Number147
ESSN1528-8951
dc.accessType Open Access


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record