• English
    • العربية
  • English
  • تسجيل الدخول
  • جامعة قطر
  • مكتبة جامعة قطر
  •  الصفحة الرئيسية
  • الوحدات والمجموعات
  • المساعدة
    • إرسال الأعمال الأكاديمية
    • سياسات الناشر
    • أدلة المستخدم
    • الأسئلة الأكثر تكراراً
  • عن المستودع الرقمي
    • الرؤية والرسالة
عرض التسجيلة 
  •   مركز المجموعات الرقمية لجامعة قطر
  • المستودع الرقمي لجامعة قطر
  • أكاديمية
  • رسائل الماجستير وأطروحات الدكتوراه
  • كلية الهندسة
  • الهندسة المدنية
  • عرض التسجيلة
  • مركز المجموعات الرقمية لجامعة قطر
  • المستودع الرقمي لجامعة قطر
  • أكاديمية
  • رسائل الماجستير وأطروحات الدكتوراه
  • كلية الهندسة
  • الهندسة المدنية
  • عرض التسجيلة
  •      
  •  
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Factors Influencing the Mechanical Properties of Geopolymer Mortar Made of Fly Ash

    Thumbnail
    عرض / فتح
    Mohamed Rabie _ OGS Approved Thesis.pdf (5.021Mb)
    التاريخ
    2020-06
    المؤلف
    Rabie, Mohamed Hassan Kamel Hassan
    البيانات الوصفية
    عرض كامل للتسجيلة
    الملخص
    Geopolymerization is a process where silica and alumina rich source materials turns into excellent binding materials by the aid of alkali solutions. Fly ash class F mainly consists of alumina and silica. Compressive strength of class F fly ash geopolymer mortar is influenced by many factors such as fluid to binder ratio, Na2SiO3/NaOH ratio, curing duration, curing temperatures, age of geopolymer mortar GPM and molarity of the NaOH solution. The present experimental study investigates the effect of these factors on the compressive strength of geopolymer mortar. For each combination, three cubes with dimensions of 50 x 50 x 50 mm were casted. After heat curing in the laboratory oven, the samples were tested on a universal testing machine for the compressive strength. A microstructural study was conducted to observe the internal structure using Scanning electron microscopy, Energy-dispersive X-ray spectroscopy and X-ray diffraction analysis. The results showed very high early compressive strength of 63.9 MPa for samples cured at 80 °C and for a duration of 24 hr. The significance of the present study is that it will allow for establishing methods for production of high strength geopolymer mortar that can be used in civil engineering applications. In addition to the environmental advantages of using such source materials to produce binding materials with good mechanical properties
    DOI/handle
    http://hdl.handle.net/10576/15243
    المجموعات
    • الهندسة المدنية [‎55‎ items ]

    entitlement


    مركز المجموعات الرقمية لجامعة قطر هو مكتبة رقمية تديرها مكتبة جامعة قطر بدعم من إدارة تقنية المعلومات

    اتصل بنا | ارسل ملاحظاتك
    اتصل بنا | ارسل ملاحظاتك | جامعة قطر

     

     

    الصفحة الرئيسية

    أرسل عملك التابع لجامعة قطر

    تصفح

    محتويات مركز المجموعات الرقمية
      الوحدات والمجموعات تاريخ النشر المؤلف العناوين الموضوع النوع اللغة الناشر
    هذه المجموعة
      تاريخ النشر المؤلف العناوين الموضوع النوع اللغة الناشر

    حسابي

    تسجيل الدخول

    إحصائيات

    عرض إحصائيات الاستخدام

    عن المستودع الرقمي

    الرؤية والرسالة

    المساعدة

    إرسال الأعمال الأكاديميةسياسات الناشرأدلة المستخدمالأسئلة الأكثر تكراراً

    مركز المجموعات الرقمية لجامعة قطر هو مكتبة رقمية تديرها مكتبة جامعة قطر بدعم من إدارة تقنية المعلومات

    اتصل بنا | ارسل ملاحظاتك
    اتصل بنا | ارسل ملاحظاتك | جامعة قطر

     

     

    Video